25 October 2017 Transmission properties of defect mode in one-dimensional symmetry photonic crystal under one-way stress
Author Affiliations +
Proceedings Volume 10464, AOPC 2017: Fiber Optic Sensing and Optical Communications; 1046427 (2017) https://doi.org/10.1117/12.2285734
Event: Applied Optics and Photonics China (AOPC2017), 2017, Beijing, China
Abstract
Using 4×4 transfer matrix method, we investigated the transmission properties of defect mode in one-dimensional photonic crystal. The system can be transformed to be biaxial photonic crystal under one-way stress. It is found that the transmission properties of defect mode are critically depending on the numbers of dielectric layers and degree of asymmetry. For the system without stress, in the case of system with mirror symmetry, the defect mode is appearing gradually and its peak wavelength always keeps stable with the numbers of dielectric layers increasing, and its corresponding transmittance will be sharply decrease from a constant to zero at the same time. In the case of asymmetry, the defect mode is appearing gradually and its peak wavelength still keeps stable with the asymmetric degree continuously growth. Meanwhile, its transmittance exist an evolution from increase to decrease in this progress, and the maximum transmittance can be obtained at Δm=0 . After applying a fixed one-way stress on the system, the single defect mode will be split into Left-side defect mode (LDM) and Right-side defect mode (RDM). In the case of system with mirror symmetry, the two defect modes are appearing gradually and their peak wavelength always keep constant with the numbers of dielectric layers increasing, respectively, and their corresponding transmittance decrease asynchronously from a constant to zero. In the case of asymmetry, the peak wavelengths of LDM and RDM are being a constant with the changing of asymmetric degree and their corresponding transmittance are synchronously increasing or decreasing with the continuously increasing of asymmetric degree. Particularly, the maximum transmittance of defect mode also can be obtained at Δm=0 . This study provided a theoretical guidance for the best choice of numbers of dielectric layers to design a pressure sensor.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yang Li, Yang Li, Yan-ling Han, Yan-ling Han, Di He, Di He, Kang Han, Kang Han, Hong Wang, Hong Wang, Guang-bin Wu, Guang-bin Wu, } "Transmission properties of defect mode in one-dimensional symmetry photonic crystal under one-way stress", Proc. SPIE 10464, AOPC 2017: Fiber Optic Sensing and Optical Communications, 1046427 (25 October 2017); doi: 10.1117/12.2285734; https://doi.org/10.1117/12.2285734
PROCEEDINGS
11 PAGES


SHARE
Back to Top