20 February 2018 Measurement and removal of cladding light in high power fiber systems
Author Affiliations +
Abstract
The amount of cladding light is important to ensure longevity of high power fiber components. However, it is usually measured either by adding a cladding light stripper (and thus permanently modifying the fiber) or by using a pinhole to only transmit the core light (ignoring that there may be cladding mode content in the core area). We present a novel noninvasive method to measure the cladding light content in double-clad fibers based on extrapolation from a cladding region of constant average intensity. The method can be extended to general multi-layer radially symmetric fibers, e.g. to evaluate light content in refractive index pedestal structures.

To effectively remove cladding light in high power systems, cladding light strippers are used. We show that the stripping efficiency can be significantly improved by bending the fiber in such a device and present respective experimental data. Measurements were performed with respect to the numerical aperture as well, showing the dependency of the CLS efficiency on the NA of the cladding light and implying that efficiency data cannot reliably be given for a certain fiber in general without regard to the properties of the guided light.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Till Walbaum, Andreas Liem, Thomas Schreiber, Ramona Eberhardt, Andreas Tünnermann, "Measurement and removal of cladding light in high power fiber systems", Proc. SPIE 10513, Components and Packaging for Laser Systems IV, 105130U (20 February 2018); doi: 10.1117/12.2288266; https://doi.org/10.1117/12.2288266
PROCEEDINGS
9 PAGES


SHARE
Back to Top