16 February 2018 Dynamically stable operation of a 100-watt level CW single frequency ring laser at 1064 nm
Author Affiliations +
Abstract
For high-resolution spectroscopy, a stable, narrow linewidth and high power output laser is desirable in order to pump different types of resonant optical parametric oscillators, which is the goal of the present work. Typical single frequency pump lasers are in the range of 10 watt output power whereas, depending on application and OPO type, higher power (>20 W) is desirable. Here we demonstrate a high-power single frequency laser based on off the shelf standard Nd:YAG pump modules. Two closely spaced, diode-side-pumped Nd:YAG rods were used in a mode-filling configuration to form a CW polarized ring resonator with TEM00 beam quality and output power of 105 W. The output power achieved is, to our knowledge, the highest reported for continuous polarized, fundamental-mode ring lasers using standard side-pumped Nd:YAG modules. The resonator allowed for power tuning over a large dynamic range and achieved excellent beam quality, using a half wave plate between both rods for birefringence compensation. Single frequency operation was achieved using a TGG crystal and an etalon, with a preliminary output power of 40 W.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Niklaus U. Wetter, Niklaus U. Wetter, Allan Bereczki, Allan Bereczki, Amauri A. Ferreira, Amauri A. Ferreira, } "Dynamically stable operation of a 100-watt level CW single frequency ring laser at 1064 nm", Proc. SPIE 10518, Laser Resonators, Microresonators, and Beam Control XX, 1051811 (16 February 2018); doi: 10.1117/12.2290480; https://doi.org/10.1117/12.2290480
PROCEEDINGS
7 PAGES + PRESENTATION

SHARE
RELATED CONTENT


Back to Top