19 February 2018 Characteristics of micro-holes drilled in ambient air and vacuum by high-power Nd:YAG laser
Author Affiliations +
Abstract
This study presents the comparison of laser drilling of nickel based superalloy in air and vacuum environment. A 300W Nd:YAG laser was used to carry out the experimental study, pulse width and pulse peak power were studied of their influence on the hole quality and appearance, the experiments were respectively conducted in air and vacuum. It was found that the holes drilled in vacuum were much different to those drilled in air. Laser of shorter pulse width may drill the better holes in the air, but in the vacuum it was the pulse width around 1ms that produced holes of the best quality.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wenqiang Duan, Wenqiang Duan, Xuesong Mei, Xuesong Mei, Wenjun Wang, Wenjun Wang, Kedian Wang, Kedian Wang, } "Characteristics of micro-holes drilled in ambient air and vacuum by high-power Nd:YAG laser", Proc. SPIE 10520, Laser-based Micro- and Nanoprocessing XII, 105200S (19 February 2018); doi: 10.1117/12.2289954; https://doi.org/10.1117/12.2289954
PROCEEDINGS
4 PAGES + PRESENTATION

SHARE
RELATED CONTENT

DUV high power lasers processing for glass and CFRP
Proceedings of SPIE (May 15 2017)
Development of new type of nozzle for high power Nd...
Proceedings of SPIE (February 06 2000)
Rock excavation with laser
Proceedings of SPIE (January 13 2000)

Back to Top