26 February 2018 4D manufacturing of intermetallic SMA fabricated by SLM process
Author Affiliations +
Proceedings Volume 10523, Laser 3D Manufacturing V; 1052311 (2018) https://doi.org/10.1117/12.2288176
Event: SPIE LASE, 2018, San Francisco, California, United States
In the present report, we demonstrate how Selective laser melting (SLM) process can contribute to a 4D manufacturing of functional and structural properties of shape memory alloys (SMAs) in-situ synthesized into Ni-Ti and Cu-Al-Ni powdered systems. Correlations of specific resistance and phase structure in Ni-Ti and Cu-Al-Ni intermetallic phases after the SLM were experimentally observed. It was shown that electrical resistivity of the phases studied (austenite, rhombohedral and martensite phases) increases with temperature but the slopes are quite different. Intermediate R-phase in nitinol (NiTi – intermetallide) shows generally higher electrical resistivity than the austenite phase, but its value grows with the decrease of temperature for laser melted samples. We explained this fact by an accumulation of dislocation with the continuous increase of the R-phase with the decrease of temperature. Hysteresis loop of the electrical resistivity and phase-structural properties of SL-Melted samples are correlated with conditions of SLM process, additional heating during the layerwise process, 3D part's porosity. It will be important for perspective 4D printed biomedical applications (bio-MEMS - sensors, drug delivery systems, implants, etc.) of fabricated self- self-initiating and self-fixing SMAs.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Igor Shishkovsky, Igor Shishkovsky, Vladimir Scherbakov, Vladimir Scherbakov, } "4D manufacturing of intermetallic SMA fabricated by SLM process ", Proc. SPIE 10523, Laser 3D Manufacturing V, 1052311 (26 February 2018); doi: 10.1117/12.2288176; https://doi.org/10.1117/12.2288176

Back to Top