26 February 2018 Rapid TMC laser prototyping: compositional and phase-structural sustainability via combinatorial design of titanium-based gradient alloy reinforced by nano-sized TiC or TiB2 ceramics
Author Affiliations +
Proceedings Volume 10523, Laser 3D Manufacturing V; 1052315 (2018) https://doi.org/10.1117/12.2288260
Event: SPIE LASE, 2018, San Francisco, California, United States
Abstract
In this study, we developed an innovative approach to achieving a higher sustainability in the experimentally guided combinatorial design of metal-matrix gradient structural composites. The titanium carbide of nano sizes or titanium diboride of submicron sizes were incorporated into the titanium matrix during the selective laser melting (SLM) process of Ti+(10, 15, 20 wt.%) TiC/TiB2 powder mixtures. Optimal regimes of 3D laser powder bed process were determined. We compared how the interfacial properties would change due to the composition differences in case of TiC and TiB2 reinforcing titanium matrix composites (TMC). Phase analysis of the fabricated TMC showed that the initial TiC and TiB2 particles dissolved with different velocities after remelting. Special attention was paid to carbon and boron dilution and secondary carbides and borides phase formation mechanisms when TiC/TiB2 were mixed with titanium. Microstructure, phase constitution and mechanical properties of the TMCs were investigated by the OM, SEM, XRD and microhardness measurement in order to validate the rapid alloy prototyping (RAP) concept in single technological approach.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Igor Shishkovsky, Igor Shishkovsky, Nina Kakovkina, Nina Kakovkina, Vladimir Scherbakov, Vladimir Scherbakov, } "Rapid TMC laser prototyping: compositional and phase-structural sustainability via combinatorial design of titanium-based gradient alloy reinforced by nano-sized TiC or TiB2 ceramics", Proc. SPIE 10523, Laser 3D Manufacturing V, 1052315 (26 February 2018); doi: 10.1117/12.2288260; https://doi.org/10.1117/12.2288260
PROCEEDINGS
6 PAGES + PRESENTATION

SHARE
Back to Top