26 February 2018 Investigation of direct metal laser sintering process of iron powder with low laser power
Author Affiliations +
Proceedings Volume 10523, Laser 3D Manufacturing V; 105231C (2018) https://doi.org/10.1117/12.2299654
Event: SPIE LASE, 2018, San Francisco, California, United States
Abstract
Laser additive manufacturing (LAM) is layer by layer built up a 3-D part using either a bed or stream of powdered material. In this paper, the heat transfer and melt solidification of iron powder in the direct metal laser sintering (DMLS) process with low laser powers have been experimental investigated. The experimental results of various properties of each layer and properties among the multiple layers due to the laser power, the scanner rate, of the frequency of the laser pulse, have been shown and discussed. The process will be improved by numerical modeling in the future.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. Thongsuwan, A. Ranusawud, P. Limsuwan, S. Jaiyen, P. Buranasiri, "Investigation of direct metal laser sintering process of iron powder with low laser power", Proc. SPIE 10523, Laser 3D Manufacturing V, 105231C (26 February 2018); doi: 10.1117/12.2299654; https://doi.org/10.1117/12.2299654
PROCEEDINGS
7 PAGES + PRESENTATION

SHARE
Back to Top