PROCEEDINGS VOLUME 10525
SPIE LASE | 27 JANUARY - 1 FEBRUARY 2018
High-Power Laser Materials Processing: Applications, Diagnostics, and Systems VII
IN THIS VOLUME

7 Sessions, 23 Papers, 14 Presentations
Systems I  (5)
Systems II  (4)
Proceedings Volume 10525 is from: Logo
SPIE LASE
27 January - 1 February 2018
San Francisco, California, United States
Front Matter: Volume 10525
Proc. SPIE 10525, Front Matter: Volume 10525, 1052501 (7 May 2018); doi: 10.1117/12.2322859
LASE Plenary Session
Proc. SPIE 10525, Advanced industrial laser systems and applications, 1052502 (15 February 2018); doi: 10.1117/12.2299534
Systems I
Proc. SPIE 10525, The Laser Megajoule facility: laser performances and comparison with computational simulation, 1052503 (15 February 2018); doi: 10.1117/12.2287342
Proc. SPIE 10525, Multi-physical modeling of thermal and dispersive effects in optical systems for high power ultra-short laser pulses, 1052504 (15 February 2018); doi: 10.1117/12.2288190
Proc. SPIE 10525, Tuneable UV solid-state laser lines for surface processing, 1052505 (15 February 2018); doi: 10.1117/12.2287382
Proc. SPIE 10525, Influence of thermally induced aberrations on resulting intensity distribution , 1052506 (15 February 2018); doi: 10.1117/12.2289174
Proc. SPIE 10525, Beam shaping of focused radiation of multimode lasers, 1052507 (15 February 2018); doi: 10.1117/12.2287980
Systems II
Proc. SPIE 10525, Improving accuracy of robot-guided 3D laser surface processing by workpiece measurement in a blink, 1052508 (15 February 2018); doi: 10.1117/12.2290573
Proc. SPIE 10525, Mobile laser cutting system for complex rescue operations, 1052509 (15 February 2018); doi: 10.1117/12.2286865
Proc. SPIE 10525, Ball-shaped end caps for fiber laser systems, 105250A (15 February 2018); doi: 10.1117/12.2286174
Proc. SPIE 10525, Measurement of the dispersion properties of large aperture mirrors at arbitrary incidence angle and polarization state, 105250B (15 February 2018); doi: 10.1117/12.2289695
Welding and Cutting
Proc. SPIE 10525, BrightLine weld-spatter reduced high speed welding with disk lasers, 105250C (15 February 2018); doi: 10.1117/12.2287205
Proc. SPIE 10525, Pores in laser beam welding: generation mechanism and impact on the melt flow, 105250D (15 February 2018); doi: 10.1117/12.2295798
Proc. SPIE 10525, New welding techniques and laser sources for battery welding, 105250E (15 February 2018); doi: 10.1117/12.2291078
Proc. SPIE 10525, New milestones in laser cutting for quality improvement and process automation, 105250F (15 February 2018); doi: 10.1117/12.2311407
Surface Treatment I
Proc. SPIE 10525, Research on inorganic cladding of neodymium phosphate glass in slab amplifier, 105250G (15 February 2018); doi: 10.1117/12.2288986
Proc. SPIE 10525, Backscattered light properties during femtosecond laser ablation and development of a dynamic interferometric focusing system, 105250H (15 February 2018); doi: 10.1117/12.2285899
Proc. SPIE 10525, Laser beam ablation of thick steel plates without affecting the material underneath, 105250I (15 February 2018); doi: 10.1117/12.2287752
Proc. SPIE 10525, Femtosecond pulsed laser deposition of a boron thin film aiming at the development of a low-cost neutron detector, 105250J (15 February 2018); doi: 10.1117/12.2285896
Proc. SPIE 10525, Approaches for increasing process rate of local 3D laser decoating for series production of hybrid composites, 105250L (15 February 2018); doi: 10.1117/12.2290635
Surface Treatment II
Proc. SPIE 10525, Influence of operating parameters on morphology of laser hardened surfaces, 105250M (15 February 2018); doi: 10.1117/12.2288890
Proc. SPIE 10525, Development of high power laser ablation process for polycrystalline diamond polishing: Part 1. Fundamental understanding of PCD ultra-short pulsed laser ablation, 105250N (15 February 2018); doi: 10.1117/12.2290197
Proc. SPIE 10525, High pulse energy kW average power nanosecond lasers enable breakthrough in rapid coating removal, 105250O (15 February 2018); doi: 10.1117/12.2290200
Back to Top