23 February 2018 Study of high power generation in UTC-PD at 110-210 GHz
Author Affiliations +
Abstract
We designed and fabricated a low-bias operational uni-travelling carrier photodiode (UTC-PD) structure, which can be operated at over 100 GHz. The main structure of the device consisted of p-doped InGaAs for the photo-absorption layer and non-doped InP for the carrier collector layer, to obtain both a high electron drift velocity at a low bias and a small CR time constant based on the pn-junction capacitance. Through an on-wafer probing test, the frequency response was measured up to 210 GHz using a 1 mm coaxial connecter type (DC-110GHz), W-band (75–110 GHz) and G-band (140–220 GHz) waveguide probe with a spectrum analyzer. In the measurement results, a large bandwidth of 10 MHz-110 GHz could be obtained with good flatness within ±1 dB. When the W-band and G-band performance were characterized, the high-power characteristic of -3.8 dBm could be achieved at 106 GHz. and the output power level of - 19.8 dBm could be confirmed at 210 GHz as well.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Toshimasa Umezawa, Toshimasa Umezawa, Atsushi Kanno, Atsushi Kanno, Kouichi Akahane, Kouichi Akahane, Atsushi Matsumoto, Atsushi Matsumoto, Naokatsu Yamamoto, Naokatsu Yamamoto, Tetsuya Kawanishi, Tetsuya Kawanishi, } "Study of high power generation in UTC-PD at 110-210 GHz", Proc. SPIE 10531, Terahertz, RF, Millimeter, and Submillimeter-Wave Technology and Applications XI, 1053115 (23 February 2018); doi: 10.1117/12.2287589; https://doi.org/10.1117/12.2287589
PROCEEDINGS
7 PAGES


SHARE
Back to Top