23 February 2018 Radiation and process-induced damage in Ga2O3
Author Affiliations +
Abstract
Ga2O3 is gaining attention for high breakdown electronics. The β-polymorph is air-stable, has a wide bandgap (~4.6 eV) and is available in both bulk and epitaxial form. Different types of power diodes and transistors fabricated on Ga2O3 have shown impressive performance. Etching processes for Ga2O3 are needed for patterning for mesa isolation, threshold adjustment in transistors, thinning of nano-belts and selective area contact formation. Electrical damage in the near-surface region was found through barrier height changes of Schottky diodes on the etched surface. The damage is created by energetic ion bombardment, but may also consist of changes to near-surface stoichiometry through loss of lattice elements or deposition of etch residues. Annealing at 450°C removes this damage. We also discuss recent results on damage introduction by proton and electron irradiation. In this case, the carrier removal rates are found to be similar to those reported for GaN under similar conditions of dose and energy of the radiation.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. J. Pearton, S. J. Pearton, Jiancheng Yang, Jiancheng Yang, F. Ren, F. Ren, G. Yang, G. Yang, Jihyun Kim, Jihyun Kim, M. Stavola, M. Stavola, A. Kuramata, A. Kuramata, } "Radiation and process-induced damage in Ga2O3", Proc. SPIE 10532, Gallium Nitride Materials and Devices XIII, 105320K (23 February 2018); doi: 10.1117/12.2284486; https://doi.org/10.1117/12.2284486
PROCEEDINGS
12 PAGES + PRESENTATION

SHARE
Back to Top