The new oxide paradigm for solid state ultraviolet photodetectors

D. J. Rogers; P. Bove; X. Arrateig; V. E. Sandana; F. H. Teherani; M. Razeghi; R. McClintock; E. Frisch; S. Harel

doi:10.1117/12.2319505

22 March 2018 The new oxide paradigm for solid state ultraviolet photodetectors

D. J. Rogers, P. Bove, X. Arrateig, V. E. Sandana, F. H. Teherani, M. Razeghi, R. McClintock, E. Frisch, S. Harel

Proceedings Volume 10533, Oxide-based Materials and Devices IX; 105331P (2018) https://doi.org/10.1117/12.2319505
Event: SPIE OPTO, 2018, San Francisco, California, United States

Abstract

The bandgap of wurzite ZnO layers grown on 2 inch diameter c-Al₂O₃ substrates by pulsed laser deposition was engineered from 3.7 to 4.8 eV by alloying with Mg. Above this Mg content the layers transformed from single phase hcp to mixed hcp/fcc phase before becoming single phase fcc above a bandgap of about 5.5 eV. Metal-Semiconductor-Metal (MSM) photodetectors based on gold Inter-Digitated-Transducer structures were fabricated from the single phase hcp layers by single step negative photolithography and then packaged in TO5 cans. The devices gave over 6 orders of magnitude of separation between dark and light signal with solar rejection ratios (I₂₇₀ : I₃₅₀) of over 3 × 10⁵ and dark signals of 300 pA (at a bias of -5V). Spectral responsivities were engineered to fit the “Deutscher Verein des Gas- und Wasserfaches” industry standard form and gave over two decade higher responsivities (14 A/W, peaked at 270 nm) than commercial SiC based devices. Homogeneous Ga₂O₃ layers were also grown on 2 inch diameter c-Al₂O₃ substrates by PLD. Optical transmission spectra were coherent with a bandgap that increased from 4.9 to 5.4 eV when film thickness was decreased from 825 to 145 nm. X-ray diffraction revealed that the films were of the β-Ga₂O₃ (monoclinic) polytype with strong (-201) orientation. β-Ga₂O₃ MSM photodetectors gave over 4 orders of magnitude of separation between dark and light signal (at -5V bias) with dark currents of 250 pA and spectral responsivities of up to 40 A/W (at -0.75V bias). It was found that the spectral responsivity peak position could be decreased from 250 to 230 nm by reducing film thickness from 825 to 145 nm. This shift in peak responsivity wavelength with film thickness (a) was coherent with the apparent bandgap shift that was observed in transmission spectroscopy for the same layers and (b) conveniently provides a coverage of the spectral region in which MgZnO layers show fcc/hcp phase mixing.

Citation Download Citation

D. J. Rogers, P. Bove, X. Arrateig, V. E. Sandana, F. H. Teherani, M. Razeghi, R. McClintock, E. Frisch, and S. Harel "The new oxide paradigm for solid state ultraviolet photodetectors", Proc. SPIE 10533, Oxide-based Materials and Devices IX, 105331P (22 March 2018); https://doi.org/10.1117/12.2319505

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available