17 November 2017 Alternative designs for space x-ray telescopes
Author Affiliations +
Proceedings Volume 10563, International Conference on Space Optics — ICSO 2014; 1056320 (2017) https://doi.org/10.1117/12.2304205
Event: International Conference on Space Optics — ICSO 2014, 2014, Tenerife, Canary Islands, Spain
Abstract
The X-ray optics is a key element of space X-ray telescopes, as well as other X-ray imaging instruments. The grazing incidence X-ray lenses represent the important class of X-ray optics. Most of grazing incidence (reflective) X-ray imaging systems used in astronomy but also in other (laboratory) applications are based on the Wolter 1 (or modified) arrangement. But there are also other designs and configurations proposed, used and considered for future applications both in space and in laboratory. The Kirkpatrick-Baez (K-B) lenses as well as various types of Lobster-Eye optics and MCP/Micropore optics serve as an example. Analogously to Wolter lenses, the X-rays are mostly reflected twice in these systems to create focal images. Various future projects in X-ray astronomy and astrophysics will require large segments with multiple thin shells or foils. The large Kirkpatrick-Baez modules, as well as the large Lobster-Eye X-ray telescope modules in Schmidt arrangement may serve as examples. All related space projects will require high quality and light segmented shells (bent or flat foils) with high X-ray reflectivity and excellent mechanical stability. The Multi Foil Optics (MFO) approach represent a promising alternative for both LE and K-B X-ray optical modules. Several types of reflecting substrates may be considered for these applications, with emphasis on thin float glass sheets and, more recently, high quality silicon wafers. This confirms the importance of non-Wolter X-ray optics designs for the future. The alternative designs require novel reflective substrates which are also discussed in the paper.
Hudec, Pína, Maršíková, Černá, Inneman, and Tichý: ALTERNATIVE DESIGNS FOR SPACE X-RAY TELESCOPES

I.

INTRODUCTION

The X-ray optics is a key element of space X-ray telescopes, as well as other X-ray imaging instruments. The grazing incidence X-ray lenses represent the important class of X-ray optics. Most of grazing incidence (reflective) X-ray imaging systems used in astronomy but also in other (laboratory) applications are based on the Wolter 1 (or modified) arrangement. But there are also other designs and configurations proposed, used and considered for future applications both in space and in laboratory. The Kirkpatrick-Baez (K-B) lenses as well as various types of Lobster-Eye optics and MCP/Micropore optics serve as an example. Analogously to Wolter lenses, the X-rays are mostly reflected twice in these systems to create focal images. Various future projects in X-ray astronomy and astrophysics will require large segments with multiple thin shells or foils. The large Kirkpatrick-Baez modules, as well as the large Lobster-Eye X-ray telescope modules in Schmidt arrangement may serve as examples. All related space projects will require high quality and light segmented shells (bent or flat foils) with high X-ray reflectivity and excellent mechanical stability. The Multi Foil Optics (MFO) approach represent a promising alternative for both LE and K-B X-ray optical modules. Several types of reflecting substrates may be considered for these applications, with emphasis on thin float glass sheets and, more recently, high quality silicon wafers. This confirms the importance of non-Wolter X-ray optics designs for the future. The alternative designs require novel reflective substrates which are also discussed in the paper.

II.

KIRKPATRICK-BAEZ X-RAY OPTICS

Let us to briefly introduce and discuss the history of Kirkpatrick-Baez (K-B) systems especially in space use, The first two-dimensional x-ray image ever obtained in the laboratory with grazing incidence reflection was taken by a Kirkpatrick-Baez system [2]. The configuration is shown in Figure 2. The incident rays are focused to a line image by a parabolic sheet mirror. If the rays are reflected a second time from a parabolic surface oriented at right angle to the first one, a point-like focus is achieved. This is true for rays parallel to the centre line of the parabolas. In order to increase the collecting area a stack of parabolas of translation is constructed (Fig. 1). Whereas in the case of only one double plate system a perfect focus for on-axis rays can be achieved this is not possible for a multiple plate arrangement, where the focus remains perfect only along the projected direction of the surface normal of the primary. The exact solution for the intersection point with the focal plane of an arbitrary incident ray is given in the paper [3]. A detailed configurational analysis of the multi-plate Kirkpatrick-Baez system has also been carried out [4].

Fig. 1.

Principle of K-B MFO telescope

00099_PSISDG10563_1056320_page_3_1.jpg

Fig. 2.

Laboratory samples of advanced K-B MFO modules designed and developed at Rigaku Innovative Technologies Europe (RITE) in Prague. These modules represent two sets of mirrors from Si chips 100x100x0.525 mm. Total optics length is 600 mm, and aperture 40x40 mm.

00099_PSISDG10563_1056320_page_3_2.jpg

As for space applications, we note that the Kirkpatrick-Baez (K-B) X-ray optics was actually the first X-ray optics suggested for astronomical use. Despite to this fact, albeit some considerations and plans occurred, the astronomical X-ray telescopes flown so far on satellites mostly used the Wolter 1 type optics. Only few historical experiments on sounding rockets used K-B systems. Different situation is in the laboratory where K-B systems are in frequent use e.g. at synchrotrons. The K-B optics, despite suggested for that application, was never flown in a satellite experiment. However, it was used in several rocket experiments in the past, and in addition to that, proposed and discussed for several satellite experiments. In order to increase the collecting area (the frontal area) a stack of parabolas of translation can be constructed for astrophysical applications. However, in contrast to the single double-plate system, the image of a point-like source starts to become increasingly extended in size as the number of plates involved increases. Wolter type I telescopes bend the incident ray direction two times in the same plane, whereas the two bendings in Kirkpatrick-Baez systems occur in two orthogonal planes, which for the same incidence angle on the primary mirror requires a longer telescope [5].

Relatively easy segmentation can also be applied, to the Kirkpatrick-Baez (K-B) array of stacked orthogonal parabolic reflectors. A large K-B mirror can be segmented into rectangular modules of equal size and shape [6]. A segmented K-B telescope has the advantage of being highly modular on several levels. All segments are rectangular boxes with the same outer dimensions. Along a column, the segments are nearly identical and many are interchangeable with each other. All reflectors deviate from flatness only slightly. On the other hand the Wolter reflectors are highly curved in the azimuthal direction and the curvature varies over the mirror.

Although based mostly on glass sheets, there was also a historical attempt to create an astronomical K-B module with silicon wafers [7]. They constructed a test K-B module based on new material/substrate, namely silicon wafers. The telescope module consisted of 94 silicon wafers with diameter of 150 mm, uncoated, with thickness of 0.72 mm. The device was tested both in optical and X-rays, with measured FWHM of 150 arcsecs, dominated by large-scale flatness. It should be noted that the surface quality and flatness of Si wafers improved essentially over the time.

The experimental X-ray astronomy is recently in need of substantial innovations. The recent efforts in design and development future large and precise imaging astronomical X-ray telescopes require to re-consider both the technologies as well as designs. These X-ray telescopes require new light-weight and thin materials/substrates such as glass foils and/or silicon wafers. Their shaping to small radii, as required in Wolter designs, is not an easy task. While the K-B arrangements represent a less laborious and hence less expensive alternative. The use of K-B arrangement for IXO project was suggested and investigated by Marsikova et al. [8], and by Willingale and Spaan [9]. These investigations indicate that if superior quality reflecting plates are used and the focal length is large, angular resolution of order of a few arcsec can be achieved. Recent simulations indicate that in comparison to Wolter arrangement, the K-B optics exhibit reduced on axis collecting area but larger field of view, at comparable angular resolution [9]. Various hybrid systems were also investigated [20].

As for future projects the cost plays an important factor, we note a very important factor and that’s is the ease of constructing highly segmented modules based on multiply nested thin reflecting substrates if compared with Wolter design. While e.g. the Wolter design for IXO requires the substrates to be precisely formed with curvatures as small as 0.25 m the alternative K-B arrangement uses almost flat or only slightly bent sheets. Hence the feasibility to construct K-B module with required 5 arcsec FWHM at a affordable cost is higher than those for Wolter arrangement. The advanced K-B telescopes based on Multi Foil Optics (MFO) approach were recently designed and constructed at Rigaku Innovative Technologies Europe (RITE) in Prague based on advanced technologies of shaping of Si substrates have been investigated and developed.

Fig. 3:

Effective apertures of Wolter I (left) and Kirkpatrick-Baez (right) systems at energies (from top):1 keV, 2 keV, 5 keV, 7.5 keV, 10 keV.

00099_PSISDG10563_1056320_page_3_3.jpg00099_PSISDG10563_1056320_page_4_1.jpg

Table 1:

Comparison of Wolter and K-B optical arrangement in astronomical X-ray telescope.

III.

MULTI-FOIL X-RAY AND LOBSTER EYE OPTICS

As already mentioned, there is a need for large segmented X-ray telescopes of various geometry and geometrical arrangements including large modules of the Wolter 1 geometry (e.g. assumed for the future ESA ATHENA mission), large Kirkpatrick-Baez (further referred as K-B) modules (as they can play an important role in future X-ray astronomy projects as a promising and less laborious to produce alternative) as well as large Lobster Eye (LE) modules in the Schmidt arrangements. Although these particular X-ray optics modules differ in the geometry of foils/shells arrangements, they do not differ much from the point of the view of the foils/shells production and assembly, and also share all the problems of calculations, design, development, weight constraints, manufacture, assembling, testing, etc.

We have developed the various laboratory samples of the above mentioned X-ray optics modules based on high quality X-ray reflecting gold coated float glass foils. For the large laboratory test modules of dimensions equal or exceeding 30 x 30 x 30 cm, mostly glass foils of thickness of 0.75 mm have been used, although in future this thickness can be further reduced down to 0.3 mm and perhaps even less (we have successfully designed, developed and tested systems based on glass foils as thin as 30 microns, albeit for much smaller sizes of the modules). The requirement of minimizing the weight of future large X-ray space telescopes and at the same time achieving huge collecting areas means that the future large astronomical mirrors have to be based on thin X-ray reflecting foils i.e. thin layers with low weight which can be easily multiply nested to form the precise high throughput systems [13]. There are also further possible space applications as wide-field X-ray imagers e.g. in planetary and earth and atmospheric science.

Fig. 4

The Mini2 LE objective is focal length of 250 mm suitable for application in micro and picosatellites.

00099_PSISDG10563_1056320_page_5_1.jpg

Fig. 5

The inside view of the Mini1 LE module

00099_PSISDG10563_1056320_page_5_2.jpg

Fig. 6

Imaging properties of the Mini2 LE system – imaging of the Sun in optical light

00099_PSISDG10563_1056320_page_5_3.jpg

Fig. 7

The Mini1 LE module with focal length of 900 mm.

00099_PSISDG10563_1056320_page_5_4.jpg

The Lobster Eye Wide Field X-ray telescopes in Schmidt arrangements are based on perpendicular arrays of double-sided X-ray reflecting flats. In the first Lobster lenses developed and tested, double-sided reflecting flats produced by epoxy sandwich technology as well as gold coated glass foils have been used. Micro Schmidt lobster eye arrays with foils thickness as low as 30 microns have been developed and tested in order to confirm the capability of these systems to achieve fine angular resolutions of order of a few arcmin [12]. The thin foils are separated by 50 microns gaps in these prototypes. On the other hand, large lobster eye systems with Schmidt geometry have been designed and constructed, achieving dimensions up to 30 x 30 x 60 cm. Their optical tests have confirmed the expected performance according to calculations (computer ray-tracing) [13].

Due to its low weight and small sizes (if suitable small and light-weight detectors are used) the Lobster Eye telescopes represent a suitable payload for micro- and even picosatellites [12]. In extreme cases, the LE telescope can be accommodated inside a 100 x 100 x 300 mm picosatellite [12][13]. Besides astronomical applications for which the LE telescopes have to be placed onboard satellites [17], there also exist applications in atmosphere science where the LE telescopes should be preferably placed on balloons flying at high altitudes above areas of earth active thunderstorms, to study the related atmospheric X-ray phenomena such as red sprites and/or X-ray emission of terrestrial gamma-ray bursts. Despite the fact that this application was never considered and discussed before, it can provide valuable new scientific results.

Alternative designs can be valuable not only for satellite missions but also for rocket experiments [16].

IV.

THE NOVEL SUBSTRATES

All the designs and arrangements described above require innovative high quality X-ray reflecting substrates. The glass technology belongs to one of most promising ones, as the volume density of glass is nearly four times less if compared with electroformed nickel layers. The glass foils may be used either as flats, or alternatively may be shaped or thermally slumped to achieve the required geometry [19]. The thermal forming of glass is not a new technology since it has been used in various regions of glass industry and glass art as well as in the production of Cerenkov mirrors. However, the application of this technology in X-ray optics is related with the need to significantly improve the accuracy and minimize the errors. As the first step, small (various sizes typically less than 100 x 100 mm) glass samples of various types provided by various manufacturers have been used and thermally shaped. The geometry was either flat or curved (cylindrical or parabolic) [14]. The project continued with larger samples (up to 300 x 300 mm) and further profiles. The recent efforts focus on optimization of related parameters of both glass material and substrates as well as of the slumping process. The preliminary results show that the quality of the thermal glass replica can be significantly improved by the optimization of the material and design of the mandrel, by the modification of the thermal forming process, as well as by the optimization of the temperature. After the (partly significant) modifications and improvements we have obtained the resulting deviation of the thermally formed glass foil from the ideal designed profile less than 1 micrometer (peak to valley value) in the best case [14]. For near future, we plan continuation of these efforts together with investigations of computer-controlled forming of glass foils (according to the principles of active optics) [15][18].

Another alternative is the use of X-ray optics based on commercially available silicon wafers manufactured mainly for purposes of semiconductor industry. Silicon is relatively light (volume density 2.3 g cm-3) and already during the manufacture process it is lapped and polished (either on one or on both sides) to very fine smoothness (better than few 0.1 nm) and thickness homogeneity (of the order of 1 micrometer). Our approach is based on two steps, namely (i) on development if dedicated Si wafers with properties optimized for the use in space X-ray telescopes and (ii) on precise shaping the wafers into optical surfaces. The stacking to achieve nested arrays is performed after the wafers have been shaped. In order to achieve the very high accuracy required by future large space X-ray telescope experiments like ESA ATHENA, the parameters of the Si wafers have to be optimized (for application in X-ray optics) already at the production stage. This is why we have established and developed a multidisciplinary working group including specialists from the development department of Si wafer industry with the goal to design and manufacture Si wafers with improved parameters (mostly flatness) optimized for application in X-ray telescopes. The flatness (in the sense of the deviation of the upper surface of a free standing Si wafer from a plane) of commercially available Si wafers was however found not to be optimal for use in high-quality (order of arcsec angular resolutions) X-ray optics. The most of Si wafers show deviations from the plane of order of few tens of microns. After modifying the technology process during the Si wafer manufacture, we were able to reduce this value to less than few microns. Also the thickness homogeneity was improved about 5 times if compared to standard products [15]. In collaboration with the manufacturer, further steps are planned to improve the flatness (deviation from an ideal plane) and the thickness homogeneity of Si wafers. In addition, the shape accuracy can be essentially improved by application of active optics methods [15].

V.

CONCLUSIONS

The K-B and Lobster systems represent a promising alternative to classical imaging X-ray telescopes. The use of novel high quality X-ray reflecting substrates is important for these designs in order to achieve high angular resolution and to reduce the weight. Two promising substrates suitable for future large-aperture and fine resolution X-ray telescopes are glass foils shaped by the Glass Thermal Forming and Si wafers with proper bending, In both cases, promising results have been achieved, with peak to valley deviations of final profiles from the ideal one, being of order of 1 micron in the best cases, with space for further essential improvements and optimization. The principles of active optics can be also implemented [18].

VI.

ACKNOWLEDGEMENTS

We acknowledge the support provided by the Grant Agency of the Academy of Science of the Czech Republic, grant 13-33324S, by the Ministry of Education and Youth of the Czech Republic, project LH13065. The research on LE optics and monitors is also supported by the European social fund within the framework of realizing the project “Support of inter-sectoral mobility and quality enhancement of research teams at Czech Technical University in Prague”, CZ.1.07/2.3.00/30.0034. We acknowledge collaboration with ON Semiconductor Czech Republic in development of high quality Si wafers.

REFERENCES

[1] 

R. Hudec, L. Pina, A. Inneman, L. Sveda, H. Ticha, V. Semencova, V. Brozek, “Innovative technologies for future astronomical x-ray mirrors”, Proceedings of the SPIE, Volume 5488, pp. 875–885, 2004Google Scholar

[2] 

P. Kirkpatrick and A. V. Baez, J. Opt. Soc. Am. 38, 766 (1948).Google Scholar

[3] 

L. P. Van Speybroeck, R. C. Chase, and T. F. Zehnpfennig, Appl. Opt. 10, 945 (1971).Google Scholar

[4] 

Kast, J. W., Applied Optics 14, No.2, 537, 1975.Google Scholar

[5] 

B. Aschenbach, Realization of X-ray telescopes—from design to performance. Experimental Astronomy, Volume 26, Numbers 1-3 / August, 2009, 95–109.Google Scholar

[6] 

Gorenstein, P. et al., SPIE Vol. 2805, 74, 1996.Google Scholar

[7] 

M. J. Joy et al., The imaging properties of a silicon afer X-ray teleskope, SPIE Proc. Vol. 2279, 283, 1997.Google Scholar

[8] 

Marsikova, V. et al., AXRO2009 Online Proceedings, http://axro.cz, 2009.Google Scholar

[9] 

Willingale R. and Spaan F. H. P., Proc. SPIE Vol. 7437, 7437B-1, 2010Google Scholar

[10] 

R. Hudec, A. V. Inneman, L. Pina, V. Hudcova, L. Sveda, H. Ticha, Lobster-eye x-ray telescopes: recent progress, X-Ray and Gamma-Ray Telescopes and Instruments for Astronomy. Edited by Joachim E. Truemper, Harvey D. Tananbaum. Proceedings of the SPIE, Volume 4851, pp. 578–586, 2003.Google Scholar

[11] 

R. Hudec, L. Sveda, A. Inneman, L. Pina, Astronomical lobster eye telescopes, Proceedings of the SPIE, Volume 5488, pp. 449–459, 2004.Google Scholar

[12] 

Tichý, V.; Švéda, L.; Maršík, J.; Jakubek, J.; Maršíková, V.; Pína, L.; Hudec, R.; Hromčík, M., Tests of Imaging with Lobster-Eye X-Ray Optics and MEDIPIX2 Detector, Baltic Astronomy, Vol. 18, p. 369–373, 2010aGoogle Scholar

[13] 

Tichý, V.; Hromčík, M.; Hudec, R.; Inneman, A.; Maršík, J.; Maršíková, V.; Pína, L., Tests of Lobster-Eye Optics for a Small X-Ray Telescope, Baltic Astronomy, Vol. 18, p. 362–368, 2010.Google Scholar

[14] 

Hudec, R.; Marsikova, V.; Mika, M.; Sik, J.; Lorenc, M.; Pina, L.; Inneman, A.; Skulinova, M., “Advanced x-ray optics with Si wafers and slumped glass”, Optics for EUV, X-Ray, and Gamma-Ray Astronomy IV. Edited by Hudec, R.; Marsikova, V.; Mika, M.; Sik, J.; Lorenc, M.; Pina, L.; Inneman, A.; Skulinova, M., Proceedings of the SPIE, Volume 7437, pp. 74370S–74370S-12 (2009)Google Scholar

[15] 

Hudec, R.; Hromcik, M.; Elvis, M.; Gedeon, O., “Active x-ray optics”, in EUV and X-Ray Optics: Synergy between Laboratory and Space. Edited by Hudec, René; Pina, Ladislav. Proceedings of the SPIE, Volume 7360 (2009)., pp. 736009–736009-8 (2009)Google Scholar

[16] 

Pina, L.; Hudec, R.; Tichy, V.; Inneman, A.; Cerna, D.; Sveda, L.; Marsik, J.; Marsikova, V.; Cash, W.; Shipley, A. F.; Zeiger, B. R.; Rogers, T. D., Design of novel x-ray optical system for rocket experiment. Proceedings of the SPIE, Volume 8848, id. 884805 12 pp. (2013).Google Scholar

[17] 

Hudec, R.; Pina, L.; Marsikova, V.; Inneman, A., GRBs and Lobster Eye X-Ray Telescopes, EAS Publications Series, Volume 61, 2013, pp.611–615Google Scholar

[18] 

Hudec, R.; Inneman, A.; Pina, L.; Černá, Daniela; Tichý, Vladimir, Active x-ray optics, Proceedings of the SPIE, Volume 8777, id. 877718 7 pp. (2013)Google Scholar

[19] 

Mika, M.; Jankovsky, O.; Simek, P.; Lutyakov, O.; Havlikova, R.; Sofer, Z.; Hudec, R.; Pina, L.; Inneman, A.; Sveda, L.; Marsikova, V. Slumping of Si wafers at high temperature, Proceedings of the SPIE, Volume 8777, id. 87770Z 7 pp. (2013).Google Scholar

[20] 

Pina, L.; Hudec, R.; Tichy, V.; Inneman, A.; Cerna, D.; Marsik, J.; Marsikova, V.; Cash, Webster; Shipley, A. F.; Zeiger, B. R.; Rogers, T. D., Hybrid x-ray optical system for space astrophysics, Proceedings of the SPIE, Volume 8777, id. 87770X 8 pp. (2013).Google Scholar

© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. Hudec, R. Hudec, L. Pína, L. Pína, Veronika Maršíková, Veronika Maršíková, Daniela Černá, Daniela Černá, A. Inneman, A. Inneman, V. Tichý, V. Tichý, } "Alternative designs for space x-ray telescopes", Proc. SPIE 10563, International Conference on Space Optics — ICSO 2014, 1056320 (17 November 2017); doi: 10.1117/12.2304205; https://doi.org/10.1117/12.2304205
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT

Alternative optics for space x ray telescopes from large...
Proceedings of SPIE (September 25 2017)
Advanced x-ray optics with Si wafers and slumped glass
Proceedings of SPIE (August 31 2009)
Novel technologies for x-ray multi-foil optics
Proceedings of SPIE (August 31 2005)
Progress in x ray optics development with formed glass and...
Proceedings of SPIE (September 20 2007)
Recent progress with x ray optics based on Si wafers...
Proceedings of SPIE (July 15 2008)
Back-up technologies for IXO
Proceedings of SPIE (April 30 2009)

Back to Top