9 March 2018 Intensity-modulated dental CBCT: noise and absorbed dose study
Author Affiliations +
Dental computed tomography (CT) typically uses a cone-beam geometry with a flat-panel detector. Although the flat-panel detector normally covers the maxillary and mandibular jaws, the cone-beam scan can deliver the dose to organs that are located out of the direct beam path but sensitive to radiation damage, such as eye lens. For typical dentoalveolar cone-beam CT (CBCT) scans, this study investigates the absorbed dose distributions in the head and neck using the Monte Carlo technique, and quantifies specific organ doses. Then, we design an intensity-modulated CBCT scan protocol that can provide a higher tomographic image quality at a lesser patient dose. The beam-intensity modulation includes the changes of tube current (mA) and/or voltage (kVp) during circular scanning, and the modulation scenarios are designed considering the cervical spine through which x-ray beam attenuates largely. We assess the noise-to-dose performances for various intensity-modulation scenarios, and compare the results with that obtained for the conventional scan.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jinwoo Kim, Jonghee Yun, Seungwoo Ha, Hanbean Youn, Ho Kyung Kim, "Intensity-modulated dental CBCT: noise and absorbed dose study", Proc. SPIE 10573, Medical Imaging 2018: Physics of Medical Imaging, 105734C (9 March 2018); doi: 10.1117/12.2293396; https://doi.org/10.1117/12.2293396


Analysis of fast kV switching in dual energy CT using...
Proceedings of SPIE (March 18 2008)
Quality assessment of clinical computed tomography
Proceedings of SPIE (September 15 2008)
CT vs. VolumeScope: image quality and dose comparison
Proceedings of SPIE (December 06 2006)
X ray tube voltage and image quality in adult and...
Proceedings of SPIE (March 02 2006)

Back to Top