13 March 2018 Monte Carlo simulation of edge placement error
Author Affiliations +
Abstract
In the discussion of edge placement error (EPE), we proposed interactive pattern fidelity error (IPFE) as an indicator to judge pass/fail of integrated patterns. IPFE consists of lower and upper layer EPEs (CD and center of gravity: COG) and overlay, which is decided from the combination of each maximum variation. We succeeded in obtaining the IPFE density function by Monte Carlo simulation. In the results, we also found that the standard deviation (σ) of each indicator should be controlled by 4.0σ, at the semiconductor grade, such as 100 billion patterns per die. Moreover, CD, COG and overlay were analyzed by analysis of variance (ANOVA); we can discuss all variations from wafer to wafer (WTW), pattern to pattern (PTP), line edge roughness (LWR) and stochastic pattern noise (SPN) on an equal footing. From the analysis results, we can determine that these variations belong to which process and tools. Furthermore, measurement length of LWR is also discussed in ANOVA. We propose that the measurement length for IPFE analysis should not be decided to the micro meter order, such as >2 μm length, but for which device is actually desired.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shinji Kobayashi, Shinji Kobayashi, Soichiro Okada, Soichiro Okada, Satoru Shimura, Satoru Shimura, Kathleen Nafus, Kathleen Nafus, Carlos Fonseca, Carlos Fonseca, Joel Estrella, Joel Estrella, Masashi Enomoto, Masashi Enomoto, } "Monte Carlo simulation of edge placement error", Proc. SPIE 10585, Metrology, Inspection, and Process Control for Microlithography XXXII, 1058529 (13 March 2018); doi: 10.1117/12.2297135; https://doi.org/10.1117/12.2297135
PROCEEDINGS
11 PAGES


SHARE
Back to Top