Paper
13 March 2018 In-depth analysis and characterization of a dual damascene process with respect to different CD
Gerd Krause, Detlef Hofmann, Boris Habets, Stefan Buhl, Manuela Gutsch, Alberto Lopez-Gomez, Wan-Soo Kim, Xaver Thrun
Author Affiliations +
Abstract
In a 200 mm high volume environment, we studied data from a dual damascene process. Dual damascene is a combination of lithography, etch and CMP that is used to create copper lines and contacts in one single step. During these process steps, different metal CD are measured by different measurement methods. In this study, we analyze the key numbers of the different measurements after different process steps and develop simple models to predict the electrical behavior* . In addition, radial profiles have been analyzed of both inline measurement parameters and electrical parameters. A matching method was developed based on inline and electrical data. Finally, correlation analysis for radial signatures is presented that can be used to predict excursions in electrical signatures.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gerd Krause, Detlef Hofmann, Boris Habets, Stefan Buhl, Manuela Gutsch, Alberto Lopez-Gomez, Wan-Soo Kim, and Xaver Thrun "In-depth analysis and characterization of a dual damascene process with respect to different CD", Proc. SPIE 10585, Metrology, Inspection, and Process Control for Microlithography XXXII, 105852T (13 March 2018); https://doi.org/10.1117/12.2302971
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Critical dimension metrology

Oxides

Capacitance

Semiconducting wafers

Etching

Metals

Resistance

Back to Top