3D printing with light: towards additive manufacturing of soft, electroactive structures

D. T. Kuhnel; J. M. Rossiter; C. F. J. Faul

doi:10.1117/12.2297098

27 March 2018 3D printing with light: towards additive manufacturing of soft, electroactive structures

D. T. Kuhnel, J. M. Rossiter, C. F. J. Faul

Proceedings Volume 10594, Electroactive Polymer Actuators and Devices (EAPAD) XX; 1059411 (2018) https://doi.org/10.1117/12.2297098
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2018, Denver, Colorado, United States

Abstract

Soft electroactive devices such as dielectric elastomer actuators have been the subject of research for several decades. One of the reasons they have not found many industrial applications to date is the challenge of manufacturing such devices cost-effectively. 3D printing is now widely used to cut manufacturing time and cost in many industries, but functional and soft materials for 3D printing are still very limited. Here we present a process that could be used to 3D print functional soft, electroactive devices like dielectric elastomer actuators and sensors. We propose a simple, low-cost 3D printing platform that uses direct ink writing of elastomer composites with low filler loading of carbon-based nanoparticles. These composites allow the deposition of smooth, uniform layers as well as rapid curing of printed materials with UV light. A diode laser is then used to induce a chemical transformation of the elastomer to create conductive patterns for electrodes with arbitrary shapes and high detail. The process is still limited by the low elasticity of the laser induced electrode material but if more suitable materials can be found, this process could dramatically reduce the time, cost and complexity involved in manufacturing dielectric elastomer devices while at the same time greatly increasing the possible geometric and functional complexity of the 3D printed devices.

Citation Download Citation

D. T. Kuhnel, J. M. Rossiter, and C. F. J. Faul "3D printing with light: towards additive manufacturing of soft, electroactive structures", Proc. SPIE 10594, Electroactive Polymer Actuators and Devices (EAPAD) XX, 1059411 (27 March 2018); https://doi.org/10.1117/12.2297098

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available