27 March 2018 Pressure monitoring inside a polymer tube based on a dielectric elastomer membrane sensor
Author Affiliations +
Abstract
Dielectric Elastomers (DE) represent an attractive technology for the realization of low cost and highly stretchable capacitive sensors. The novel contribution of this work is the development of a nonintrusive DE sensor (DES) for polymer tubes, capable of measuring pressure levels inside the tube up to 60 bar. A novel solution is proposed to perform the measurement, in which a membrane DES is wrapped around the tube. While the tube expands due to high pressure, the DES capacitance increases accordingly. To perform system characterization, a test rig is designed to measure the expansion of a polymer tube while applying an external pressure. Several experiments are performed to obtain the tube characteristics at different pressure levels. Based on theoretical predictions and tube characterization, membrane DES are developed, manufactured, and then characterized. Finally, it is shown how the change in capacitance can be related to the pressure inside the tube, allowing to obtain the desired measurement. The performance of the device is assessed by means of several experiments.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Philipp Loew, Gianluca Rizzello, Stefan Seelecke, "Pressure monitoring inside a polymer tube based on a dielectric elastomer membrane sensor", Proc. SPIE 10594, Electroactive Polymer Actuators and Devices (EAPAD) XX, 105941K (27 March 2018); doi: 10.1117/12.2296332; https://doi.org/10.1117/12.2296332
PROCEEDINGS
8 PAGES + PRESENTATION

SHARE
Back to Top