15 March 2018 Buckled bistable beam actuation with twisted strings
Author Affiliations +
Abstract
In this study, the use of the twisted string concept with a pin, serving as a moment arm, is proposed to produce the snapthrough of a pre-compressed beam so that the whole system can be used as an effective on/off actuator. The twisted string mechanism is to produce a horizontal pulling force to the pin, which triggers the snap-through of the beam. The actuation moment required to trigger the bistable beam in this study is 24.3 Nmm, corresponding to a horizontal force of 0.81 N. The twisted string actuator is able to produce a pulling force of 1 N, which is further pulled through a distance of 5-mm. Static performance of the integrated system based on the effects of the length of the string on the required input motor voltage, torque, and the overall system response time is experimentally investigated. The snap-through sequence during the static experiment is also captured with a high-speed camera. The input voltage to the motor increases as the length of the string is increased. The length of the string also affects the overall system response, motor speed and torque. The whole snap-through of the beam happens within 100 msec after the trigger signal is sent.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Reynolds Addo-Akoto, Reynolds Addo-Akoto, Jong-Eun Suh, Jong-Eun Suh, Jong-Wan Lee, Jong-Wan Lee, Jong-Seob Han, Jong-Seob Han, Jae-Hung Han, Jae-Hung Han, } "Buckled bistable beam actuation with twisted strings", Proc. SPIE 10595, Active and Passive Smart Structures and Integrated Systems XII, 105950V (15 March 2018); doi: 10.1117/12.2295895; https://doi.org/10.1117/12.2295895
PROCEEDINGS
6 PAGES


SHARE
Back to Top