22 March 2018 Characteristics of energy harvesting using BaTiO3/Cu laminates with changes in temperature
Author Affiliations +
Abstract
The energy harvesting characteristics of piezoelectric/copper (BaTiO3/Cu) laminates rising from sharp temperature changes were investigated both numerically and experimentally. First, a phase field simulation was performed to determine the temperature-dependent piezoelectric coefficient and permittivity values. Then, the output voltages of the BaTiO3/Cu laminates were calculated for variations from room temperature to either a cryogenic temperature (77 K) or a higher temperature (333 K) using a 3D finite element simulation with the properties calculated from the phase field simulation. Finally, the output voltages of the piezoelectric BaTiO3/Cu laminates were measured for the same temperature changes and were compared to the simulation results.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
K. Mori, K. Mori, H. Takeuchi, H. Takeuchi, F. Narita, F. Narita, "Characteristics of energy harvesting using BaTiO3/Cu laminates with changes in temperature", Proc. SPIE 10596, Behavior and Mechanics of Multifunctional Materials and Composites XII, 105961Z (22 March 2018); doi: 10.1117/12.2296480; https://doi.org/10.1117/12.2296480
PROCEEDINGS
9 PAGES


SHARE
Back to Top