Paper
22 March 2018 Characteristics of energy harvesting using BaTiO3/Cu laminates with changes in temperature
K. Mori, H. Takeuchi, F. Narita
Author Affiliations +
Abstract
The energy harvesting characteristics of piezoelectric/copper (BaTiO3/Cu) laminates rising from sharp temperature changes were investigated both numerically and experimentally. First, a phase field simulation was performed to determine the temperature-dependent piezoelectric coefficient and permittivity values. Then, the output voltages of the BaTiO3/Cu laminates were calculated for variations from room temperature to either a cryogenic temperature (77 K) or a higher temperature (333 K) using a 3D finite element simulation with the properties calculated from the phase field simulation. Finally, the output voltages of the piezoelectric BaTiO3/Cu laminates were measured for the same temperature changes and were compared to the simulation results.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
K. Mori, H. Takeuchi, and F. Narita "Characteristics of energy harvesting using BaTiO3/Cu laminates with changes in temperature", Proc. SPIE 10596, Behavior and Mechanics of Multifunctional Materials and Composites XII, 105961Z (22 March 2018); https://doi.org/10.1117/12.2296480
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ceramics

Energy harvesting

Pyroelectricity

Dielectrics

Finite element methods

Back to Top