27 March 2018 Self-sensing characteristics experiment of modified magneto-rheological rubber bearing
Author Affiliations +
Abstract
A modified magneto-rheological rubber (MRR) which resistance can be reduced to 1KΩ was fabricated by dispersed multi-walled carbon nanotubes (MWNTs) and carbonyl iron particles (CIPs) into polydimethylsiloxane (PDMS) matrix. Based on the excellent piezo-resistive properties of this modified MRR, a MR bearing with self-sensing characteristics was proposed and systematic researched. In order to study the self-sensing characteristics of the MR bearing based on modified MRR under load and magnetic fields, the structure and working conditions of the bearing were simulated and compared. The optimal structure size of the bearing was selected and used for the build-up of experiment test system. The results showed that, under the action of preload condition by bearing, due to piezo-resistance and magnetoresistance behavior of the modified MRR, the electrical resistance of it also can be changed over 28%. It suggests that, in the MR semi-active vibration isolation system, the modified MRBs are potentially capable of being used as an actuator and sensor in the same time.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rui Li, Rui Li, Mengjiao Zhou, Mengjiao Zhou, Xingxing Xu, Xingxing Xu, Minglian Wang, Minglian Wang, Ping’an Yang, Ping’an Yang, Lin Liu, Lin Liu, } "Self-sensing characteristics experiment of modified magneto-rheological rubber bearing ", Proc. SPIE 10598, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2018, 105981O (27 March 2018); doi: 10.1117/12.2296523; https://doi.org/10.1117/12.2296523
PROCEEDINGS
8 PAGES + PRESENTATION

SHARE
Back to Top