27 March 2018 System identification and vibration-based damage detection in a concrete shear wall system
Author Affiliations +
Abstract
Structural Health Monitoring (SHM) based on the vibration of structures has been very attractive subject for researchers in different fields such as: civil, aeronautical and mechanical engineering. System Identification (SI) and Vibration based Damage Identification (VBDI) are two main parts of SHM. A full-scale seven-story reinforced concrete (RC) wall building has been tested during October 2005 and January 2006 by the University of California at San Diego (UCSD). The building was excited through four historical California ground motions. The RC wall experienced different levels of damage, progressively under increasing intensity of ground motions. At different levels of damage, the building was subjected to ambient vibration tests and low-amplitude White Gaussian Noise (WGN) base excitation. In this study, the response of the structure to ambient vibration tests is used to identify damage using VBDD method. The frequency domain decomposition method (FDD) is used to identify the modal parameters of the building. Damage changes the modal properties (frequency, mode shape and damping) by reducing the stiffness. Therefore, changes in the vibration characteristics of the structure can be used to identify location and severity of damage. A mode shape curvature-based method is used to detect and localize damage. Also a data-driven technique based on Neural Networks has been developed to identify the damage in the structure. The results show a close correlation with the structural damage observed in the experimental study.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Soltani, A. Sabamehr, A. Chandra, A. Bagchi, "System identification and vibration-based damage detection in a concrete shear wall system", Proc. SPIE 10598, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2018, 105982X (27 March 2018); doi: 10.1117/12.2296623; https://doi.org/10.1117/12.2296623
PROCEEDINGS
15 PAGES + PRESENTATION

SHARE
Back to Top