27 March 2018 Preliminary studies for the optimization of sensor placement for electro-mechanical impedance based damage detection
Author Affiliations +
Abstract
Electro-mechanical impedance based damage detection has been shown to detect small changes in structure. Due to the large frequency band which may be assessed with the EMI technique, it has been shown to detect very local damage irrespective of the change in the boundary conditions. Studies have also been carried out to compensate for ambient temperature effects. Unfortunately, the drawback of the local nature of the EMI approach is the relatively low range of sensing. As a result most of the studies using EMI approach are limited to applications where the sensitive region is apriori known. This is not always the case, and thus the study of the technique at the array level is necessary. Thus, the present study tries to establish the approach for optimization of the array of PZTs for EMI based approach. The primary task is to establish the range of the sensors to damage in an anisotropic GFRP plate. The range of the sensors and their directionality then may be used to optimize the sensor placement to ensure the maximum coverage of the plate for damage detection. Once the cost function of the optimization has been established, genetic algorithm (GA) is employed for optimization. GA offers several advantages over brute force based methods as well as other optimization approaches. GA is ideally suited for multi-objective optimization which then paves the way for incorporating other optimization objectives in the search.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rohan Soman, Rohan Soman, Tomasz Wandowski, Tomasz Wandowski, Pawel Malinowski, Pawel Malinowski, Wieslaw Ostachowicz, Wieslaw Ostachowicz, } "Preliminary studies for the optimization of sensor placement for electro-mechanical impedance based damage detection", Proc. SPIE 10600, Health Monitoring of Structural and Biological Systems XII, 1060004 (27 March 2018); doi: 10.1117/12.2295697; https://doi.org/10.1117/12.2295697
PROCEEDINGS
8 PAGES + PRESENTATION

SHARE
Back to Top