10 January 2018 A high sensitivity fiber Bragg grating seismic system and oil exploration test
Author Affiliations +
Proceedings Volume 10618, 2017 International Conference on Optical Instruments and Technology: Advanced Optical Sensors and Applications; 1061809 (2018) https://doi.org/10.1117/12.2295465
Event: International Conference on Optical Instruments and Technology 2017, 2017, Beijing, China
Abstract
In this paper we report the development and field test of a high sensitivity fiber Bragg grating (FBG) geophone for geophysical imaging and monitoring application. A high sensitivity FBG geophone is designed, and its sensitivity is about 1000pm/g. The wavelength change of the FBG geophone is interrogated by using interferometric demodulation method, and the demodulation system noise is below 10-3 pm/ √Hz . And the minimum detectable seismic signal is below 1μg/ √Hz . We are presenting field test results for the FBG geophone and comparing its performance with regular exploration geophones. In comparison, FBG geophone has the advantages of higher signal-to-noise ratio and better low-frequency response. This work shows that using FBG technology to develop geophone for oil and gas exploration is both advantageous and feasible.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhihui Sun, Ming Li, Shaodong Jiang, Meng Wang, Lin Zhang, Xiaolei Zhang, Chang Wang, Zhong Zhao, Guanghu Hao, Gangding Peng, "A high sensitivity fiber Bragg grating seismic system and oil exploration test", Proc. SPIE 10618, 2017 International Conference on Optical Instruments and Technology: Advanced Optical Sensors and Applications, 1061809 (10 January 2018); doi: 10.1117/12.2295465; https://doi.org/10.1117/12.2295465
PROCEEDINGS
6 PAGES


SHARE
Back to Top