12 January 2018 Research on position and orientation measurement method for roadheader based on vision/INS
Author Affiliations +
Roadheader which is a kind of special equipment for large tunnel excavation has been widely used in Coal Mine. It is one of the main mechanical-electrical equipment for mine production and also has been regarded as the core equipment for underground tunnel driving construction. With the deep application of the rapid driving system, underground tunnel driving methods with higher automation level are required. In this respect, the real-time position and orientation measurement technique for roadheader is one of the most important research contents. For solving the problem of position and orientation measurement automatically in real time for roadheaders, this paper analyses and compares the features of several existing measuring methods. Then a new method based on the combination of monocular vision and strap down inertial navigation system (SINS) would be proposed. By realizing five degree-of-freedom (DOF) measurement of real-time position and orientation of roadheader, this method has been verified by the rapid excavation equipment in Daliuta coal mine. Experiment results show that the accuracy of orientation measurement is better than 0.1°, the standard deviation of static drift is better than 0.25° and the accuracy of position measurement is better than 1cm. It is proved that this method can be used in real-time position and orientation measurement application for roadheader which has a broad prospect in coal mine engineering.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jinyong Yang, Jinyong Yang, Guanqin Zhang, Guanqin Zhang, Zhe Huang, Zhe Huang, Yaozhong Ye, Yaozhong Ye, Bowen Ma, Bowen Ma, Yizhong Wang, Yizhong Wang, } "Research on position and orientation measurement method for roadheader based on vision/INS", Proc. SPIE 10621, 2017 International Conference on Optical Instruments and Technology: Optoelectronic Measurement Technology and Systems, 1062105 (12 January 2018); doi: 10.1117/12.2288670; https://doi.org/10.1117/12.2288670


An Active Color Separation Sensing Technique
Proceedings of SPIE (January 01 1987)
Angle sensitive pixels a new paradigm for low power,...
Proceedings of SPIE (February 21 2012)
Calibration of a saccadic camera system to adapt to lens...
Proceedings of SPIE (October 13 2005)
Visual navigation aid for planetary UAV risk reduction
Proceedings of SPIE (September 10 2007)

Back to Top