12 January 2018 Research on fiber-optic cantilever-enhanced photoacoustic spectroscopy for trace gas detection
Author Affiliations +
Abstract
We demonstrate a new scheme of cantilever-enhanced photoacoustic spectroscopy, combining a sensitivity-improved fiber-optic cantilever acoustic sensor with a tunable high-power fiber laser, for trace gas detection. The Fabry-Perot interferometer based cantilever acoustic sensor has advantages such as high sensitivity, small size, easy to install and immune to electromagnetic. Tunable erbium-doped fiber ring laser with an erbium-doped fiber amplifier is used as the light source for acoustic excitation. In order to improve the sensitivity for photoacoustic signal detection, a first-order longitudinal resonant photoacoustic cell with the resonant frequency of 1624 Hz and a large size cantilever with the first resonant frequency of 1687 Hz are designed. The size of the cantilever is 2.1 mm×1 mm, and the thickness is 10 μm. With the wavelength modulation spectrum and second-harmonic detection methods, trace ammonia (NH3) has been measured. The gas detection limits (signal-to-noise ratio = 1) near the wavelength of 1522.5 nm is achieved to be 3 ppb.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ke Chen, Ke Chen, Xinlei Zhou, Xinlei Zhou, Zhenfeng Gong, Zhenfeng Gong, Shaochen Yu, Shaochen Yu, Chao Qu, Chao Qu, Min Guo, Min Guo, Qingxu Yu, Qingxu Yu, } "Research on fiber-optic cantilever-enhanced photoacoustic spectroscopy for trace gas detection", Proc. SPIE 10621, 2017 International Conference on Optical Instruments and Technology: Optoelectronic Measurement Technology and Systems, 1062108 (12 January 2018); doi: 10.1117/12.2282561; https://doi.org/10.1117/12.2282561
PROCEEDINGS
7 PAGES


SHARE
Back to Top