14 June 2018 An information theoretic approach to system optimization accounting for material variability
Author Affiliations +
Abstract
Differentiating material anomalies requires a measurement system that can reliably inform the user/classifier of pertinent material characteristics. In past work, we have developed a simulation framework capable of making simulated x-ray transmission and scatter measurements of virtual baggage. Using this simulated data, we have demonstrated how an information-theoretic approach to x-ray system design and analysis provides insight into system performance. Moreover, we have shown how performance limits relate to architectural variations in source fluence, view number, spectral resolution, spatial resolution, etc. However, our previous investigations did not include material variability in the description of the materials which make up the virtual baggage. One would expect the material variability to dramatically affect the results of the information-theoretic metric, and thus we now include it in our analysis. Previously, material information was captured as energy-dependent mean attenuation values. Because of this, material differentiation can always become easier with an improvement in SNR. When there is no variation to obscure class differences, improvements in SNR will indefinitely improve performance. Therefore, we saw a monotonic increase of the metric with source fluence. However there is inherent variability in materials from chemical impurities, texturing, or macroscopic variation. When this variability is accounted for, we better understand system performance limits at higher SNR as well as better represent the distributions of material characteristics. We will report on the analysis of real world system geometries and the fundamental limits of performance limits after incorporating these material variability improvements.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David Coccarelli, David Coccarelli, Joel A. Greenberg, Joel A. Greenberg, Ratchaneekorn Thamvichai, Ratchaneekorn Thamvichai, Jay Voris, Jay Voris, Ahmad Masoudi, Ahmad Masoudi, Amit Ashok, Amit Ashok, Michael Gehm, Michael Gehm, } "An information theoretic approach to system optimization accounting for material variability", Proc. SPIE 10632, Anomaly Detection and Imaging with X-Rays (ADIX) III, 106320F (14 June 2018); doi: 10.1117/12.2305227; https://doi.org/10.1117/12.2305227
PROCEEDINGS
8 PAGES + PRESENTATION

SHARE
RELATED CONTENT


Back to Top