14 May 2018 Lock-in inductive thermography for surface crack detection
Author Affiliations +
Abstract
Inductive thermography is a non-destructive technique, which can be excellently used for detection of surface cracks in electrically conductive materials. In ferro-magnetic steel even a single short pulse with duration of 50ms up to 1s is enough to induce a Joule heating which makes shallow cracks well detectable in the infrared image sequences. In the case of non-magnetic materials with high electrical and thermal conductivity, as e.g. aluminum, the situation is much more difficult: on the one hand a short heating pulse duration is necessary, otherwise the thermal signal diminishes too quickly due to the thermal diffusion. On the other hand with a short heating pulse it is not possible to induce enough heat in the material; therefore the signal-to-noise ratio becomes too low for defect detection. A possibility to overcome this problem is to apply a sequence of short pulses, as it is also done in the lock-in thermography. It is investigated, how many pulses and which pulse duration is necessary to detect surface cracks with different crack depths in non-magnetic materials, as in aluminum. It is also studied, how the heating power, that means the temperature increase during one heating pulse, influences the detectability. Experimental results are presented, obtained for an aluminum sample with artificial cracks and they are compared also with numerical simulations.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Beata Oswald-Tranta, Beata Oswald-Tranta, } "Lock-in inductive thermography for surface crack detection", Proc. SPIE 10661, Thermosense: Thermal Infrared Applications XL, 106610U (14 May 2018); doi: 10.1117/12.2309365; https://doi.org/10.1117/12.2309365
PROCEEDINGS
12 PAGES


SHARE
RELATED CONTENT

Infrared thermography processing using Markov-PCA algorithm
Proceedings of SPIE (December 18 2014)
Active thermal NDT: problems and solutions
Proceedings of SPIE (May 11 2016)
Influence of thermal radiations in infrared optical systems
Proceedings of SPIE (February 10 2005)
Performance of uncooled microcantilever thermal detectors
Proceedings of SPIE (January 22 2005)
Performance of infrared systems under field conditions
Proceedings of SPIE (September 01 1991)

Back to Top