Abstract
This PDF file contains the front matter associated with SPIE Proceedings Volume 10667, including the Title Page, Copyright information, Table of Contents, Introduction (if any), and Conference Committee listing.

The papers in this volume were part of the technical conference cited on the cover and title page. Papers were selected and subject to review by the editors and conference program committee. Some conference presentations may not be available for publication. Additional papers and presentation recordings may be available online in the SPIE Digital Library at SPIEDigitalLibrary.org.

The papers reflect the work and thoughts of the authors and are published herein as submitted. The publisher is not responsible for the validity of the information or for any outcomes resulting from reliance thereon.

Please use the following format to cite material from these proceedings:

Author(s), “Title of Paper,” in Dimensional Optical Metrology and Inspection for Practical Applications VII, edited by Kevin G. Harding, Song Zhang, Proceedings of SPIE Vol. 10667 (SPIE, Bellingham, WA, 2018) Seven-digit Article CID Number.

ISSN: 0277-786X

ISSN: 1996-756X (electronic)

ISBN: 9781510618459

ISBN: 9781510618466 (electronic)

Published by

SPIE

P.O. Box 10, Bellingham, Washington 98227-0010 USA

Telephone +1 360 676 3290 (Pacific Time)· Fax +1 360 647 1445

SPIE.org

Copyright © 2018, Society of Photo-Optical Instrumentation Engineers. Copying of material in this book for internal or personal use, or for the internal or personal use of specific clients, beyond the fair use provisions granted by the U.S. Copyright Law is authorized by SPIE subject to payment of copying fees. The Transactional Reporting Service base fee for this volume is $18.00 per article (or portion thereof), which should be paid directly to the Copyright Clearance Center (CCC), 222 Rosewood Drive, Danvers, MA 01923. Payment may also be made electronically through CCC Online at copyright.com. Other copying for republication, resale, advertising or promotion, or any form of systematic or multiple reproduction of any material in this book is prohibited except with permission in writing from the publisher. The CCC fee code is 0277-786X/18/$18.00.

Printed in the United States of America.

Publication of record for individual papers is online in the SPIE Digital Library.

00001_PSISDG10667_1066701_page_2_1.jpg

Paper Numbering: Proceedings of SPIE follow an e-First publication model. A unique citation identifier (CID) number is assigned to each article at the time of publication. Utilization of CIDs allows articles to be fully citable as soon as they are published online, and connects the same identifier to all online and print versions of the publication. SPIE uses a seven-digit CID article numbering system structured as follows:

  • The first five digits correspond to the SPIE volume number.

  • The last two digits indicate publication order within the volume using a Base 36 numbering system employing both numerals and letters. These two-number sets start with 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 0A, 0B … 0Z, followed by 10-1Z, 20-2Z, etc. The CID Number appears on each page of the manuscript.

Authors

Numbers in the index correspond to the last two digits of the seven-digit citation identifier (CID) article numbering system used in Proceedings of SPIE. The first five digits reflect the volume number. Base 36 numbering is employed for the last two digits and indicates the order of articles within the volume. Numbers start with 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 0A, 0B…0Z, followed by 10-1Z, 20-2Z, etc.

Barragán-Pérez, Omar, 0H

Brahm, Anika, 04, 0D

Bromberg, Vadim, 0K

Castillo, Eduardo A., 0M

Dietrich, Patrick, 0A

Fiorillo, Timothy, 0K

Harding, Kevin, 0E, 0I, 0K, 0O

Heist, Stefan, 04, 0A, 0D, 0F

Kar, Aravinda, 0M

Kühmstedt, Peter, 04, 0A, 0D, 0F

Kumar, Ranganathan, 0M

Landmann, Martin, 04, 0A, 0D

Li, Beiwen, 0G

Liu, Ziping, 07

McDermed, Shawn, 0I

Michtchenko, Alexandre, 0H

Nehmetallah, George, 02

Nguyen, Thanh, 02

Notni, Gunther, 04, 0A, 0D, 0F

Novak, Erik, 0I

Pascual-Francisco, Juan Benito, 0H

Ramamurthy, Rajesh, 0K

Reichwald, Karl, 0F

Schindwolf, Simon, 04, 0D

Susarrey-Huerta, Orlando, 0H

Wang, Yajun, 09

Zhang, Chen, 0F

Zhang, Song, 07, 09, 0C

Conference Committee

Symposium Chair

  • Robert Fiete, Harris Corporation (United States)

Symposium Co-chair

  • Jay Kumler, JENOPTIK Optical Systems, LLC (United States)

Conference Chairs

  • Kevin G. Harding, Optical Metrology Solutions (United States)

  • Song Zhang, Purdue University (United States)

Conference Program Committee

  • Motoharu Fujigaki, University of Fukui (Japan)

  • Khaled J. Habib, Kuwait Institute for Scientific Research (Kuwait)

  • Damien P. Kelly, Technische Universität Ilmenau (Germany)

  • Peter Kühmstedt, Fraunhofer-Institut für Angewandte Optik und Feinmechanik (Germany)

  • Beiwen Li, Iowa State University (United States)

  • Rongguang Liang, College of Optical Sciences, The University of Arizona (United States)

  • Georges T. Nehmetallah, The Catholic University of America (United States)

  • Gunther Notni, Fraunhofer-Institut für Angewandte Optik und Feinmechanik (Germany)

  • Lei Tian, Boston University (United States)

  • Joseph D. Tobiason, Micro Encoder Inc. (United States)

  • Zhaoyang Wang, The Catholic University of America (United States)

  • Jiangtao Xi, University of Wollongong (Australia)

Session Chairs

  • 1 Optical Metrology Analysis

    Song Zhang, Purdue University (United States)

  • 2 Optical Metrology Methods I

    Maik Rosenberger, Technische Universität Ilmenau (Germany)

  • 3 Optical Metrology Methods II

    Kevin G. Harding, Optical Metrology Solutions (United States)

  • 4 Optical Metrology Applications

    Song Zhang, Purdue University (United States)

  • 5 Additive Methods for Micro Electronic or Flexible Features

    Kevin G. Harding, Optical Metrology Solutions (United States)

  • 6 Advanced Additive Manufacturing Methods

    Kevin G. Harding, Optical Metrology Solutions (United States)

© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
"Front Matter: Volume 10667", Proc. SPIE 10667, Dimensional Optical Metrology and Inspection for Practical Applications VII, 1066701 (3 August 2018); https://doi.org/10.1117/12.2502239
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
3D metrology

Optical metrology

3D modeling

3D image enhancement

3D image processing

Additive manufacturing

Shape analysis

Back to Top