14 May 2018 Error mapping method for multi-axis additive manufacturing system
Author Affiliations +
Abstract
The use of multiple axis machines for direct write additive manufacturing offers the potential for the custom manufacture of a wide range of useful structures ranging from sensor on curved parts to electronics on unique shapes. The motion axis for such systems do not need the force and robustness of metal cutting applications, but the geometric requirements for electronic patterns means the machines need to compensate for a wide range of errors at micron levels. The types of errors of concern may include motion axis alignments in 5-axis and more specific printing tool or fixture variations. In order to correct for any such errors, there is a need for a mapping method that can be applied across machine platforms without the need for substantial modifications to the machines. This paper will describe the selection and application of well defined, readily available basic geometric artifacts that permit the separate mapping of key error sources in such a system. The ability to provide the error measurement using simple sensors commonly available will be contrasted to more expensive, traditional volumetric mapping methods.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rajesh Ramamurthy, Rajesh Ramamurthy, Vadim Bromberg, Vadim Bromberg, Timothy Fiorillo, Timothy Fiorillo, Kevin Harding, Kevin Harding, } "Error mapping method for multi-axis additive manufacturing system", Proc. SPIE 10667, Dimensional Optical Metrology and Inspection for Practical Applications VII, 106670K (14 May 2018); doi: 10.1117/12.2309558; https://doi.org/10.1117/12.2309558
PROCEEDINGS
11 PAGES + PRESENTATION

SHARE
Back to Top