15 June 1989 A Fiberoptic Temperature Sensor And Control System For Laser Thermal Angioplasty
Author Affiliations +
Proceedings Volume 1067, Optical Fibers in Medicine IV; (1989) https://doi.org/10.1117/12.952108
Event: OE/LASE '89, 1989, Los Angeles, CA, United States
Abstract
An electro-optical system has been developed to monitor and control the temperature of the metal tip laser thermal angioplasty catheters. This system captures the infrared radiation (IR) emitted from the hot metal tip during the angioplasty procedure. The infrared energy travels through the same fiber that is used to deliver the laser energy and reaches the photodetector through special collection optics. The photodetector signal is further processed and correlated with the temperature of the probe tip. The temperature of these probes can be controlled in the range of 200 to 600 degrees centigrade. Additionally this infrared system allows performance of diagnostics on the fiber itself and detects conditions that may cause temperature fluctuations at the probe tip. This system has been tested with fibers ranging in core diameter from 116 to 600 micrometers and probe tip diameters from 0.5 to 5.0 millimeters.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Vahid Saadatmanesh, Vahid Saadatmanesh, Hany M. G Hussein, Hany M. G Hussein, } "A Fiberoptic Temperature Sensor And Control System For Laser Thermal Angioplasty", Proc. SPIE 1067, Optical Fibers in Medicine IV, (15 June 1989); doi: 10.1117/12.952108; https://doi.org/10.1117/12.952108
PROCEEDINGS
12 PAGES


SHARE
RELATED CONTENT


Back to Top