Presentation
29 May 2018 Hybrid plasmonic waveguide coupled to a single organic molecule (Conference Presentation)
Samuele Grandi, Michael Nielsen, Javier Cambiasso, Sebastien Boissier, Kyle D. Major, Christopher Reardon, Thomas F. Krauss, Rupert F. Oulton, E. A. Hinds, Alex Clark
Author Affiliations +
Abstract
Efficient photon sources will enable many quantum technologies. Single dibenzoterrylene (DBT) molecules are promising photon sources, but often emit in an unknown direction making photon collection challenging. Dielectric structures redirect emission into single optical modes [1], but are relatively large due to the diffraction limit of light. Plasmonic devices, such as antennae, can concentrate the electromagnetic field at the site of an emitter on a surface in volumes below the diffraction limit and redirect emission into well-controlled directions, but often suffer from losses. Recently, planar dielectric antennae have shown promise for redirecting emission [2], however often they do not provide single mode operation or compatibility with integrated photonics. Here we present a hybrid dielectric--metal approach in coupling a single molecule to an optical mode in an integrated planar device. We designed and fabricated a hybrid plasmonic waveguide (HPW) consisting of a dielectric slab with a nanoscale gap patterned in gold on the surface. Replacing the silicon layer used in our previous work [3] with titanium dioxide (TiO$_2$) allows operation at ~785 nm, the emission wavelength of DBT. Light propagating in the TiO$_2$ layer passes through the gap between the islands of gold. The width of the gap controls mode confinement: when the gap is <100 nm the propagating mode is mainly in the gap providing strong confinement; but when the gap is wider the mode decouples from the gold and propagates mainly in the TiO$_2$ with low loss. We deposited DBT-doped anthracene crystals on the surface using a supersaturated vapour growth technique [4]. Using confocal fluorescence microscopy we found a DBT molecule positioned near the gap. We then measured the saturation intensity of the molecule to be $I_{sat} = 325(27)$ kW/cm$^{2}$. Illuminating the molecule with a pulsed laser we measured the lifetime of the molecule to be 2.74(2) ns. Under CW excitation we measured the second-order correlation function $g^{(2)}(tau)$ of the light emitted directly into the microscope. This shows clear anti-bunching with $g^{(2)}(0)=0.25(6)$ proving this to be a single molecule. By detecting photons simultaneously from the microscope and from the grating coupler we measured $g^{(2)}(0)=0.24(6)$, demonstrating that this single molecule was emitting into the waveguide mode. By measuring the optical losses in our setup we calculated the coupling efficiency from the molecule to the HPW to be ~22%. This method provides a route to building waveguide sources of photons in planar integrated quantum photonic circuits for applications in quantum technology. [1] S. Faez et al., Phys. Rev. Lett. 113, 213601 (2014). [2] X. L. Chu et al., Optica 5, 203-208 (2014). [3] M. A. Nielsen et al., Nano. Lett. 16, 1410-1414 (2016). [4] C. Polisenni et al., Opt. Express 24, 5615-5627 (2016).
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Samuele Grandi, Michael Nielsen, Javier Cambiasso, Sebastien Boissier, Kyle D. Major, Christopher Reardon, Thomas F. Krauss, Rupert F. Oulton, E. A. Hinds, and Alex Clark "Hybrid plasmonic waveguide coupled to a single organic molecule (Conference Presentation)", Proc. SPIE 10674, Quantum Technologies 2018, 106740M (29 May 2018); https://doi.org/10.1117/12.2306890
Advertisement
Advertisement
KEYWORDS
Molecules

Plasmonic waveguides

Geometrical optics

Dielectrics

Digital breast tomosynthesis

Gold

Integrated optics

Back to Top