24 May 2018 Position measurement of in-line microbid holograms using an autoregressive method
Author Affiliations +
Abstract
The work developed and presented in this communication, relates to the restitution of frequency chirp of an interferometric signal deduced from a measured diffraction pattern relating to a spherical micro-particle. For this purpose, analysis were achieved by implementing a parametric method with a sliding window. These frequencies allows us to reconstruct the axial position of the corresponding object. The study, achieved in the far field approximation, allows us to validate preceding methods based on simulation results. The principle consists to generate optically in-line diffraction patterns of a spherical particle with radii of 39μm and measured with a microscope ZEISS. The collimated coherent light was generated from a He-Ne laser that the wavelength is λ = 632.8 nm. The generated diffraction pattern was recorded by using a 2D-CCD camera Ophir having 1024 x768 pixels with a pitch of 4.65 μm connected to a computer. Since the variation of the chirp frequency is linear, the knowledge of its variation slop, resulting from a linear fit, enables us to deduce the z-position of the particle. This is achieved with a resolution of 1.2 %.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nadia Saidani, Nadia Saidani, Ali Boukellal, Ali Boukellal, Rabah Mokdad, Rabah Mokdad, Pierre Pfeiffer, Pierre Pfeiffer, } "Position measurement of in-line microbid holograms using an autoregressive method ", Proc. SPIE 10677, Unconventional Optical Imaging, 106773F (24 May 2018); doi: 10.1117/12.2306572; https://doi.org/10.1117/12.2306572
PROCEEDINGS
6 PAGES


SHARE
Back to Top