Presentation + Paper
17 May 2018 Traceable instruments for encircled angular flux measurements
Natascia Castagna, Jacques Morel, Edward Robinson, Hui Yang
Author Affiliations +
Abstract
We report on the development of an instrument for the measurement of the Encircled Angular Flux (EAF) and on establishing its metrological traceability at the required level of uncertainty. We designed and built for that purpose two independent EAF measuring instruments, both based on the analysis of the two-dimensional far field intensity profile observed at the output of an optical fibre, using either CMOS or CCD cameras. An in depth evaluation of the factors influencing the accuracy of the measurements was performed and allowed determining an uncertainty budget for EAF measurements, which was validated by a first series of inter-comparisons. Theses comparisons were performed between the two independent EAF measuring systems, using a 850 nm LED coupled into a gradient index fibre as a test object. We demonstrated a very good equivalence between the two systems, well within the absolute measurement uncertainties that were estimated at the 10-3 level. Further inter-comparisons using light sources coupled to step-index, large core and small core multimode fibres are still ongoing, with the aim to confirm the performances of the instrument under various illuminating conditions.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Natascia Castagna, Jacques Morel, Edward Robinson, and Hui Yang "Traceable instruments for encircled angular flux measurements", Proc. SPIE 10683, Fiber Lasers and Glass Photonics: Materials through Applications, 106831B (17 May 2018); https://doi.org/10.1117/12.2306430
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cameras

Calibration

CMOS cameras

CCD cameras

Gradient-index optics

Light sources

Metrology

Back to Top