17 May 2018 Fabrication of microstructures by rear-side picosecond laser irradiation of two-layer PMMA
Author Affiliations +
Abstract
Micro-structures offer superior functions such as superhydrophobicity, selfcleaning, anti-wear and drag reduction. In this paper, various microstructures were fabricated by rear-side picosecond laser irradiation of two-layer materials. The material of underlying layer was commonly commercial available ink; the material of surface layer was PMMA. The high light absorptivity of underlying material result in significantly reduced absorption depth. The laser source could therefore be regarded as plane heat source, leading to better surface morphologies after the mater-laser interaction. The results showed that convex structures were obtained at a lower laser fluence; with increase of laser fluence, a doughnut-like structures were obtained; with further rise of laser fluence, bowl-like structures would be obtained. Moreover, the size of microstructures could be tuned by adjusting laser processing parameters such as laser power, frequency and laser-mater interaction time. This method provides an insight for fabrication of functional surface.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jiang Li, Jiang Li, Wenjun Wang, Wenjun Wang, Xuesong Mei, Xuesong Mei, Aifei Pan, Aifei Pan, } "Fabrication of microstructures by rear-side picosecond laser irradiation of two-layer PMMA ", Proc. SPIE 10683, Fiber Lasers and Glass Photonics: Materials through Applications, 106832U (17 May 2018); doi: 10.1117/12.2306705; https://doi.org/10.1117/12.2306705
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

Thin glass processing with various laser sources
Proceedings of SPIE (March 12 2015)
Nonlinear absorption characteristics of carbon quantum dots
Proceedings of SPIE (October 15 2015)
Picosecond and subpicosecond laser ablation of polymers
Proceedings of SPIE (December 27 1996)
Picosecond and femtosecond laser ablation of hard tissues
Proceedings of SPIE (December 03 1996)
Comparison of ns and ps pulses for Si and glass...
Proceedings of SPIE (March 05 2009)
Investigation of UV picosecond laser ablation of polymers
Proceedings of SPIE (December 09 2005)

Back to Top