17 May 2018 High-power picosecond fiber-based laser operating at 515 nm
Author Affiliations +
Abstract
We have developed a fiber-based laser source operating at 515 nm. The experimental setup is composed of a 1030 nm picosecond fiber laser, a Volume Bragg Grating (VBG) based compressor, and a Second Harmonic Generation (SHG) module. The 1030 nm picosecond fiber laser is made with an ANDi mode-lock all-fiber oscillator using a tilted Fiber Bragg Grating (FBG) for spectral filtering. A bandpass filter centered at 1030 nm permits to reduce the bandwidth of the laser to 1.5 nm. A Chirped Fiber Bragg Grating (C-FBG) based stretcher increases the pulse duration to about 90 ps for avoiding nonlinear effects during amplification. A fiber pre-amplifier followed by a double-clad 15 µm core LMA fiber amplifier pumped with a 27 W multimode diode are subsequently used. The total available power at 1030 nm is 14 Watts. SHG is achieved with a type I non-critical phase-matching (NCPM), 15 mm long, Lithium Triborate (LBO) crystal. The 515 nm signal is near diffraction limit (M2 < 1.2). The emitted average output power is 5.8 W, the pulse duration is 2.1 ps and the repetition rate is 89 MHz (SHG efficiency is 45%)
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jean-Bernard Lecourt, Jean-Bernard Lecourt, Sébastien Guillemet, Sébastien Guillemet, Julien Dupuy, Julien Dupuy, Alexandre Gognau, Alexandre Gognau, Yves Hernandez, Yves Hernandez, } "High-power picosecond fiber-based laser operating at 515 nm", Proc. SPIE 10683, Fiber Lasers and Glass Photonics: Materials through Applications, 1068338 (17 May 2018); doi: 10.1117/12.2307471; https://doi.org/10.1117/12.2307471
PROCEEDINGS
7 PAGES


SHARE
Back to Top