5 June 2018 Parametric model of an optical system consisting of two and three reflecting surfaces and its analysis
Author Affiliations +
Abstract
Development of a parametric model of an optical system consisting of 2 and 3 reflective surfaces and its analysis are considered in this paper. The construction of a parametric model is necessary to simplify the initial stage of designing optical systems. The basis of the parametric model is built by replacing reflective surfaces on thin components equivalent, in which a three-mirror system can be written using an external virtual axis angles (zero) beam with the optical axis. To solve the problem of minimizing aberrations, the theory of third-order aberrations developed by Professor G.G.Slyusarev is used. As a result of working is a universal equation, describing the entire variety of optical systems of three thin mirror components forming a flat image, the design parameters of which depend on the 3 coefficients that enter the equation. The use of the obtained parametric model of an optical system consisting of 3 reflecting surfaces makes it possible to simplify the stage of the initial synthesis of mirror optical systems and to obtain an initial version of a system free from spherical aberration, coma, astigmatism and curvature of the image.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kseniia Ezhova, Kseniia Ezhova, Victor Zverev, Victor Zverev, Irina Timoshchuk, Irina Timoshchuk, Anton Chuhlamov, Anton Chuhlamov, Dmitriy Fedorenko, Dmitriy Fedorenko, Andrey Veremenko, Andrey Veremenko, } "Parametric model of an optical system consisting of two and three reflecting surfaces and its analysis", Proc. SPIE 10690, Optical Design and Engineering VII, 1069024 (5 June 2018); doi: 10.1117/12.2311852; https://doi.org/10.1117/12.2311852
PROCEEDINGS
12 PAGES


SHARE
RELATED CONTENT

Free form surfaces in imaging optics
Proceedings of SPIE (December 16 2014)
Design Techniques For WFOV High-Resolution Reflecting Optics
Proceedings of SPIE (November 30 1978)
Translation of CODEV Lens Model To IGES Input File
Proceedings of SPIE (October 30 1986)
Compact Collimator Modeling Using Spline Functions
Proceedings of SPIE (June 09 1987)
Design of the optics for an imaging classic mount multi...
Proceedings of SPIE (September 30 2011)

Back to Top