5 June 2018 Development of software for production of design documentation for aspherical optical components
Author Affiliations +
The field of application of aspheric optics is steadily expanding. Aspheric surfaces can be found in photographic optics, astronomical optics and other optical systems that are now at the forefront of the optical science. The production of elements with aspherical surfaces is a very long and time-consuming process both from the design and the technological points of view. In CAE-systems the information is placed in accordance with the developed dialog interface and the traditions of a country / programming language and others. These data are specific for each program, which greatly complicates the processing of data. The purpose of this work is to investigate the possibility to automate the production of design documentation for optical elements with aspherical surfaces in accordance with international ISO standards. It was decided to develop an application software package, embedded in the CAD-environment. The presented software package solves the problem of producing design documentation based on the data from such CAE-systems as OPAL PC and Zemax. The methodical material, developed during the research, contains information about work with parameters of aspherical surfaces in the CAE-systems indicated above. The design documentation must be complied in accordance with Russian standards and ISO 10110-12: 2007. Dialog windows of the software request all the data necessary for the release of drawings. The report presents different approaches of algorithmic solutions of the tasks, the dialog interface and examples of document automatic execution results.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Anastasiya D. Kozhina, Anastasiya D. Kozhina, Nadezhda D. Tolstoba, Nadezhda D. Tolstoba, } "Development of software for production of design documentation for aspherical optical components", Proc. SPIE 10690, Optical Design and Engineering VII, 106902F (5 June 2018); doi: 10.1117/12.2312258; https://doi.org/10.1117/12.2312258


Analysis of the quality of the image formed by the...
Proceedings of SPIE (September 22 2015)
Measurement methods to build up the digital optical twin
Proceedings of SPIE (February 19 2018)
Optical design for international manufacture
Proceedings of SPIE (June 05 1995)
Aspheric surface and aberration ripple in a high NA optical...
Proceedings of SPIE (September 26 2008)
Bonnet polishing high-slope aspheric surface
Proceedings of SPIE (October 15 2012)

Back to Top