Paper
20 February 2018 Study on the feasibility of ion beam figuring on DKDP crystal
Author Affiliations +
Proceedings Volume 10697, Fourth Seminar on Novel Optoelectronic Detection Technology and Application; 106974S (2018) https://doi.org/10.1117/12.2314564
Event: Fourth Seminar on Novel Optoelectronic Detection Technology and Application, 2017, Nanjing, China
Abstract
In order to explore the feasibility of ion beam figuring (IBF) on DKDP crystal, the DKDP crystal machined by single point diamond turning (SPDT) was processed by IBF. This paper investigates the influence of IBF on DKDP crystal. Firstly, the surface quality and the photo-thermal absorption of DKDP crystal were measured respectively after SPDT and IBF. Then,the laser-induced damage threshold (LIDT) of two different processing crystals were tested by R-on-1 method. Finally, the mechanisms that the effect of IBF on LIDT were analyzed and discussed. After processing, the DKDP crystal remained intact. The surface quality satisfied the frequency tripping crystal requirement. However, due to the environmental impact, DKDP crystal had deliquescence, which contribute to decrease the LIDT of DKDP by 27.5%. IBF on DKDP is feasible,it is necessary to control the processing environment to avoid the crystal deliquescence.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhifan Lin, Feng Shi, Yifan Dai, Hao Hu, Ci Song, and Qi Xiao "Study on the feasibility of ion beam figuring on DKDP crystal", Proc. SPIE 10697, Fourth Seminar on Novel Optoelectronic Detection Technology and Application, 106974S (20 February 2018); https://doi.org/10.1117/12.2314564
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Crystals

Absorption

Laser crystals

Ion beam finishing

Laser induced damage

Single point diamond turning

Ion beams

RELATED CONTENT


Back to Top