6 July 2018 LSST craft raft integration support equipment: design, assembly, and test status
Author Affiliations +
We present the mechanical device used to install the Raft Tower Modules (RTMs) into the cryosat of the camera for the Large Synoptic Survey Telescope (LSST). In an RTM, the charge-coupled devices (CCDs) are packaged into a 3 x 3 Raft Sensor Assembly (RSA) and coupled to a Raft Electronics Crate (REC). An RTM weighs ~10 kg, is roughly 500 mm tall, and has a 126.5 mm-square footprint at the CCDs. The grid array which supports the RTM in the cryostat has a center-to-center distance of 127 mm. One of the key challenges for installing the RTMs in the 500 μm gap between CCDs of adjacent modules - contact between adjacent CCDs is strictly forbidden.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Travis Lange, Travis Lange, Boyd Bowdish, Boyd Bowdish, Stefano Russo, Stefano Russo, Stephen Tether, Stephen Tether, Seth W. Digel, Seth W. Digel, Tony Johnson, Tony Johnson, Scott P. Newbry, Scott P. Newbry, Andrew P. Rasmussen, Andrew P. Rasmussen, Vincent T. Lee, Vincent T. Lee, Kevin A. Reil, Kevin A. Reil, Tim Bond, Tim Bond, Giorgio Dho, Giorgio Dho, } "LSST craft raft integration support equipment: design, assembly, and test status", Proc. SPIE 10702, Ground-based and Airborne Instrumentation for Astronomy VII, 107024J (6 July 2018); doi: 10.1117/12.2310061; https://doi.org/10.1117/12.2310061


The PAU camera at the WHT
Proceedings of SPIE (August 04 2016)
PS2 managing the next step in the Pan STARRS...
Proceedings of SPIE (September 25 2012)
High-accuracy photometry using CCD technology
Proceedings of SPIE (September 26 1995)
Mosaic focal plane development
Proceedings of SPIE (December 18 2002)

Back to Top