10 July 2018 Design and analysis of active vibration damper for telescope by linear motor
Author Affiliations +
The imaging quality and resolution of telescopes are deeply affected by the vibration that caused by electromechanical system and wind shake. Normally, vibration is caused by insufficient damping of the structure. In this paper, an active damper system based on linear motor is proposed to suppress vibration. The model of the whole control system is established at the beginning of this paper. LQR (Linear Quadratic Regulator) algorithm is proposed and the simulation is performed based on actual parameters of system. The results show that the system has a higher stability with higher Q value. The dynamic characteristics of the structure was obtained by analyzing the modal test data from accelerators. The experiments have been carried out to test the performance of the system. The results indicated that the active vibration damper can reduce the structure vibration 93.8% at 5.5Hz and increase the stiffness of structure.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
FuJia Du, FuJia Du, Zhiyong Zhang, Zhiyong Zhang, Hao Li, Hao Li, Penghui Li, Penghui Li, "Design and analysis of active vibration damper for telescope by linear motor", Proc. SPIE 10706, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation III, 107062R (10 July 2018); doi: 10.1117/12.2303542; https://doi.org/10.1117/12.2303542

Back to Top