Translator Disclaimer
10 July 2018 Lateral displacement bi-plate for DIMM
Author Affiliations +
Abstract
The optical instrument used to measure and characterize sky quality at the IAC observatories is the DIMM (differential image motion measurements). The optical system and its mode of operation are relatively simple. It consists, basically, placing two equal apertures at the entrance of a telescope, in one of them an optical wedge is located. In this way, two beams of the same object are obtained which will lead to two on the focal plane of the telescope but laterally separated a few seconds arc. The complexity of this optical system lies in the "simplicity" of the plate used to separate the beams, it is a flat-faced wedge of a few minutes, and this is where problems arise when manufacturing it.

In this paper we present a new optical system concept to separate the beams. This is done using two optical flats tilted. The optical flats are not placed at the entrance of the telescope, but in the convergent beam. The optical design, manufacture and the test results obtained are presented.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Félix Gracia Témich, José Luis Rasilla, and José Miguel Delgado Hernández "Lateral displacement bi-plate for DIMM", Proc. SPIE 10706, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation III, 107064V (10 July 2018); https://doi.org/10.1117/12.2314595
PROCEEDINGS
10 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Imaka: a ground-layer adaptive optics system on Maunakea
Proceedings of SPIE (August 05 2016)
SOFIA tracking image simulation
Proceedings of SPIE (September 14 2016)
SOFIA observatory performance and characterization
Proceedings of SPIE (September 27 2012)

Back to Top