5 March 2018 Numerical analysis of special-shaped surface in abrasive flow machining
Author Affiliations +
Proceedings Volume 10710, Young Scientists Forum 2017; 107102T (2018) https://doi.org/10.1117/12.2316304
Event: Young Scientists Forum 2017, 2017, Shanghai, China
Abstract
Solid-liquid two-phase abrasive flow machining is a method to effectively polish the surface of Special-shaped surface parts. Based on the processing characteristics of the abrasive flow machining. The standard model and the pressure-coupled SIMPLEC algorithm are used. The shear force and velocity of the near-wall surface of the runner of the solid-liquid two-phase abrasive machining with different inlet pressure are analyzed. The numerical simulation results show that the inlet pressure has little effect on the velocity, and the shear force has a linear relationship with the inlet pressure. To obtain a better polishing effect, the outlet pressure can be appropriately increased.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Junye Li, Junye Li, Zengwei Zhou, Zengwei Zhou, Guiling Wu, Guiling Wu, Hui Lu, Hui Lu, Zhihuai Sun, Zhihuai Sun, } "Numerical analysis of special-shaped surface in abrasive flow machining", Proc. SPIE 10710, Young Scientists Forum 2017, 107102T (5 March 2018); doi: 10.1117/12.2316304; https://doi.org/10.1117/12.2316304
PROCEEDINGS
6 PAGES


SHARE
Back to Top