5 March 2018 Reviews on laser cutting technology for industrial applications
Author Affiliations +
Proceedings Volume 10714, Third International Conference on Photonics Solutions (ICPS2017); 107140Q (2018) https://doi.org/10.1117/12.2300955
Event: Third International Conference on Photonic Solutions, 2017, Pattaya, Thailand
Abstract
In this paper, an overview of the laser technology applied for the industrial has been reviewed. In general, this technology was used in several engineering applications such as industrial, medical, science, research sectors, etc. Focusing on the laser technology in the industrial section, it was, normally, employed for many purposes i.e. target marking, welding, drilling, and also cutting. Consequently, the laser cutting technology was, however, divided into three classifications YAG, CO2, and fiber laser, respectively. Each laser types have different advantages and disadvantages depending on the material type. The advantages by using laser cutting compared with the general cutting machines were exploited in terms of narrow kerf, high cutting speed, low heat-affected zone (HAZ), improve efficiency of the cutting process, high accuracy, etc. However, the main objectives from the technology used were increasing of the products and also decreasing the production cost. In the opposite way, some disadvantages of the technology were summarized by complexity to operate, high maintenance cost, and also high power consumption. In Thailand industry, there were many factories used this technology as a cutting process. Unfortunately, only few researches were published. It might explains that this technology were difficulty to develop, high investment, and also easy to import from aboard. For becoming to the Thailand 4.0 community, the Thailand industry might awareness to reduce the importing machine and boosting some policies to create novel innovative / know-how from the own country.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
T. Muangpool, T. Muangpool, S. Pullteap, S. Pullteap, } "Reviews on laser cutting technology for industrial applications", Proc. SPIE 10714, Third International Conference on Photonics Solutions (ICPS2017), 107140Q (5 March 2018); doi: 10.1117/12.2300955; https://doi.org/10.1117/12.2300955
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

Advances in drilling with fiber lasers
Proceedings of SPIE (July 01 2015)
Material Processing Laser Systems For Manufacturing
Proceedings of SPIE (November 12 1986)
Diode-pumped solid state lasers and applications
Proceedings of SPIE (June 08 1994)
Use of the 2 µm cw laser as addition and...
Proceedings of SPIE (March 23 2007)
European Industrial Laser Market
Proceedings of SPIE (March 16 1989)

Back to Top