Presentation + Paper
21 September 2018 Sensitivity and tolerance analysis of 2D Profilometer for TMT primary mirror segments
Vineeth Valsan, S. Sriram, Alikhan Basheer, Janani Varadhachari, G.C. Anupama
Author Affiliations +
Abstract
The primary mirror (M1) of Thirty Meter Telescope (TMT) consists of 492 segments of which, 86 are ground and polished by India-TMT. These segments are off-axis and aspheric in nature and one of the effective methods to polish such segments is through Stressed Mirror Polishing (SMP). During SMP, consistent in-situ metrology of the surface is needed to achieve the required profile. A 2D Profilometer (2DP) will be used by India-TMT for the low frequency profile metrology. The 2DP is a contact-approach metrology, consisting of probes positioned in a spiral pattern, measuring the sag of segment surface. Initial section of this paper deals with the sensitivity and tolerance analysis of the 2DP. This is followed by the study on position and rotational errors of the 2DP as a whole. Simulation of these analysis is carried out initially on a sphere and then on different segments of the TMT, in order to study the induced measurement errors.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Vineeth Valsan, S. Sriram, Alikhan Basheer, Janani Varadhachari, and G.C. Anupama "Sensitivity and tolerance analysis of 2D Profilometer for TMT primary mirror segments", Proc. SPIE 10742, Optical Manufacturing and Testing XII, 1074210 (21 September 2018); https://doi.org/10.1117/12.2321083
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polishing

Surface finishing

Monochromatic aberrations

Mirrors

Optical spheres

Profilometers

Thirty Meter Telescope

RELATED CONTENT

Fabrication and metrology study for M3M of TMT
Proceedings of SPIE (September 02 2014)
Retroreflector Concepts; Corner-Cube Compared To Catseye
Proceedings of SPIE (January 01 1987)
TMT: stressed mirror polishing fixture study
Proceedings of SPIE (June 26 2006)
Fabrication Of The Keck Ten Meter Telescope Primary Mirror
Proceedings of SPIE (October 22 1985)

Back to Top