Sensitive uncooled thermal imager based on liquid crystal Fabry-Perot interferometer

Colin McGinty; Philip Bos

doi:10.1117/12.2319394

18 September 2018 Sensitive uncooled thermal imager based on liquid crystal Fabry-Perot interferometer

Colin McGinty, Philip Bos

Proceedings Volume 10766, Infrared Sensors, Devices, and Applications VIII; 1076606 (2018) https://doi.org/10.1117/12.2319394
Event: SPIE Optical Engineering + Applications, 2018, San Diego, California, United States

Abstract

Microbolometers are the dominant technology for uncooled thermal imaging and recently devices based on a direct birefringence measurement of a 1 μm-thick liquid crystal (LC) transducer pixel have been shown to have comparable sensitivity to current microbolometers. A modified approach for increasing device sensitivity to the temperature-dependent indices of refeaction is use of an LC resonant cavity in an etalon structure. The measured quantity is the transmission of a visible wavelength through the etalon which requires no thermal contact with the IR absorbing cavity. In this paper a detailed device design is proposed for a LC resonant cavity between dielectric mirrors. The dielectric mirror materials beneath the cavity were chosen to be compatible with existing VLSI processing. The mirror materials above the cavity were chosen to have high transmittance for the 8-14 μm LWIR band and the visible probe wavelength. The performance of this design was evaluated numerically and is shown to yield 31% change in transmitted intensity over the 200 mK temperature range considered when pixel thickness is 470 nm. For comparison, a 1 μm-thick LC pixel based on direct birefringence measurement is expected to yield a 1.6% transmission change over the same range. The etalon device represents a 19x increase in sensitivity with thinner pixels – this leads to lower pixel thermal mass and faster thermal response times.

Conference Presentation

Citation Download Citation

Colin McGinty and Philip Bos "Sensitive uncooled thermal imager based on liquid crystal Fabry-Perot interferometer", Proc. SPIE 10766, Infrared Sensors, Devices, and Applications VIII, 1076606 (18 September 2018); https://doi.org/10.1117/12.2319394

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available