Translator Disclaimer
9 October 2018 Visualizing simulated temperatures of a complex object calculated with FTOM using open source software (BLENDER)
Author Affiliations +
The Fraunhofer thermal object model (FTOM) predicts the temperature of an object as a function of the environmental conditions. The model has an outer layer exchanging radiation and heat with the environment and a stack of layers beyond modifying the thermal behavior. The orientation of the layer is defined by the normal vector of the surface. The innermost layer is at a constant or variable temperature called core temperature. All the layers have heat capacity and thermal conductivity. The outer layers properties are color (visible), emissivity (IR), coefficients of free and forced convection, and a factor for latent heat. The environmental parameters are air temperature, wind speed, relative humidity, irradiation of the sun, and thermal radiation of the sky and ground. The properties of the model (7 parameters) are fitted to minimize the difference between the prediction and a time series of measured temperatures. The size of the time series is one or more days with 288 values per day (5 minute resolution). The model is useable for very different objects like backgrounds (meadow, forest, rocks, sand, or bricks) or parts of objects like vehicles. The STANDCAM is a decoy of a vehicle and is used to constitute a thermal signature and is not classified. The STANDCAM has a complex CAD-Model with thousands of triangular facets that had to be simplified for the thermal simulation. The CAD model was available through WTD 52, an agency of the Federal Office of Bundeswehr Equipment, Information Technology and In-Service Support (BAAINBw). Groups of elements of the model facing in the same direction and behaving similarly were cut out and grouped in distinct objects. The calculation of the temperature of the objects is based on measured environmental data and the model parameters are fitted on measured radiation temperatures of the objects and backgrounds. For the visualization the object is surrounded by a world texture. For the radiation temperature of the environment and the ground under the object measured air and meadow temperatures were used. The temperature is coded as a color from a palette (here we use a grey palette) and is updated regularly throughout the calculation of the scene for the selected view and is stored as a texture bitmap. The animation of the temperature textures is directly performed by BLENDER.The result of the visualization is available as movie that is watchable in real time or time lapse.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
B. Bartos and K. Stein "Visualizing simulated temperatures of a complex object calculated with FTOM using open source software (BLENDER)", Proc. SPIE 10794, Target and Background Signatures IV, 1079407 (9 October 2018);


FTOM 2D a two dimensional approach to model the...
Proceedings of SPIE (October 20 2015)
CUBI: a test body for thermal object model validation
Proceedings of SPIE (April 29 2007)
Virtual reality for microassembly
Proceedings of SPIE (October 07 2007)
Micro-archiving and interactive virtual insect exhibit
Proceedings of SPIE (May 22 2002)

Back to Top