Paper
11 January 2019 High reflecting film deposition of all-CFRP mirror
Yongjie Wang, Xiaoge Wu, Haochuan Li, Liang Xu, Jiaoteng Ding, Yongjie Xie, Zhen Ma
Author Affiliations +
Proceedings Volume 10837, 9th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes; 108370X (2019) https://doi.org/10.1117/12.2504867
Event: Ninth International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT2018), 2018, Chengdu, China
Abstract
To improve the reflecting properties of all CFRP mirror, a high reflecting coating must be prepared on the mirror surface. In this paper, the effect of the roughness, film material and the deposition temperature on the reflecting rate was discussed. In the experiments, it was observed that the film exhibited higher reflecting rate on the smoother surface; meanwhile, the deposition rate must be controlled below the soften point of the surface replicated resin; if not, pits will generate on the surface and reduce reflecting rate. Ag film system exhibited higher reflecting rate than Al films. Finally, a multilayer film Ag and SiO2 was deposited on CFRP mirror, with a reflecting rate over 95% between 450nm and 800 nm.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yongjie Wang, Xiaoge Wu, Haochuan Li, Liang Xu, Jiaoteng Ding, Yongjie Xie, and Zhen Ma "High reflecting film deposition of all-CFRP mirror", Proc. SPIE 10837, 9th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, 108370X (11 January 2019); https://doi.org/10.1117/12.2504867
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Coating

Composites

High reflection coatings

RELATED CONTENT


Back to Top