Paper
25 July 1989 Moire Alignment Technique For Projection Photolithographic System
Dai Sugimoto, Seiichiro Kimura, Tsutomu Nomura, Yoshiyuki Uchida, Shuzo Hattori
Author Affiliations +
Abstract
We are developing a projection moire alignment technique in order to obtain an alignment accuracy of better than 0.1μm(3σ) using simple alignment optics in a projection photolitographic system.[1] Chromatic aberration between the exposure light(g-line) and the alignment light(He-Ne Laser) was compensated using fundamental moire theory without compricated optical unit. The beam pointing stability of He-Ne laser has affected an alignment accuracy. By taking reference beam befor incident on the wafer, we have removed this problem. We obtained an alignment accuracy of 0.07μm in resist mark and 0.10μm in Si etched mark.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dai Sugimoto, Seiichiro Kimura, Tsutomu Nomura, Yoshiyuki Uchida, and Shuzo Hattori "Moire Alignment Technique For Projection Photolithographic System", Proc. SPIE 1088, Optical/Laser Microlithography II, (25 July 1989); https://doi.org/10.1117/12.953153
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical alignment

Moire patterns

Semiconducting wafers

Reticles

Wafer-level optics

Sensors

Signal detection

RELATED CONTENT

Focusing and leveling in dual stage lithographic system
Proceedings of SPIE (October 22 2010)
Alignment technique using wafer rear surface
Proceedings of SPIE (June 01 1992)
Dark Field Technology A Practical Approach To Local...
Proceedings of SPIE (January 01 1987)
Nikon EB Stepper: the latest development status
Proceedings of SPIE (August 20 2001)

Back to Top