High-power all-fiber-integrated super-continuum source from 1.57 to 12 microns

Mohammed N. Islam; Carl DeWilde; Lukasz Maksymiuk; Michael J. Freeman; Kaiwen Guo; Ramon A. Martinez; Robert Maynard; Shawn Z. Meah; Brandon Demory; Tianqu Zhai; Fred L. Terry

doi:10.1117/12.2513974

7 March 2019 High-power all-fiber-integrated super-continuum source from 1.57 to 12 microns

Mohammed N. Islam, Carl DeWilde, Lukasz Maksymiuk, Michael J. Freeman, Kaiwen Guo, Ramon A. Martinez, Robert Maynard, Shawn Z. Meah, Brandon Demory, Tianqu Zhai, Fred L. Terry

Author Affiliations +

Proceedings Volume 10897, Fiber Lasers XVI: Technology and Systems; 108970S (2019) https://doi.org/10.1117/12.2513974
Event: SPIE LASE, 2019, San Francisco, California, United States

Abstract

All-fiber integrated super-continuum (SC) sources are described based on a platform architecture that can operate in the visible, near-infrared, short-wave infrared, mid-wave infrared and long-wave infrared, with demonstrated SC wavelengths ranging from 0.47 to 12 μm. Modulation instability initiated SC generation leads to a simple SC source with no moving parts and that uses o_-the-shelf components from the mature telecommunications and fiber optics industry. The resulting light sources are basically a cascade of fibers pumped by fiber-pigtailed laser diodes and some drive and control electronics; thus, the SC sources have the potential to be cost-effective, compact, robust and reliable. Starting from fused silica fibers, the SC spectrum can be extended to shorter or longer wavelengths by cascading fibers with appropriate dispersion and/or transparency. As one example, we demonstrate a long-wave infrared SC source that generates a continuous spectrum from approximately 1.57 to 12 μm using a fiber cascade comprising fused silica fiber followed by ZBLAN fluoride fiber followed by sulfide fiber and, finally, a high-numerical-aperture selenide fiber. The time-averaged output power is as high as 417 mW at 33% duty cycle, and we observe a near-diffraction-limit, single spatial-mode beam across the entire spectral range. A prototype is described that is based on a three-layer architecture with a form factor of 16.7 × 10 × 5.7 and that plugs into a standard wall plug. This SC prototype has been used in a number of field tests as the active illuminator for stand-off FTIR system over distances of 5 to 25 m, thus enabling identification of targets or samples based on their chemical signature. Further optimization of the SC source will also be described to increase the output power and to reduce the form factor.

Conference Presentation

Citation Download Citation

Mohammed N. Islam, Carl DeWilde, Lukasz Maksymiuk, Michael J. Freeman, Kaiwen Guo, Ramon A. Martinez, Robert Maynard, Shawn Z. Meah, Brandon Demory, Tianqu Zhai, and Fred L. Terry "High-power all-fiber-integrated super-continuum source from 1.57 to 12 microns", Proc. SPIE 10897, Fiber Lasers XVI: Technology and Systems, 108970S (7 March 2019); https://doi.org/10.1117/12.2513974

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available